Page 33 - featured

The Mishimoto 2nd-Generation Cummins Intercooler, Part 3: Prototype Evaluation and Test Fit

Posted: May 04, 2015

Categories: Dodge Ram 5.9L Diesel Intercooler 1994-2002

Tags: turbo, teammishi, ram, muddin, mishimoto, merica, intercooler, holset, featured, dodge, diesel, 4x4, 3500, 2500

Interested in picking up our 2nd Gen Cummins intercooler or intercooler pipe kit? Check out the product pages linked below!

Dodge 5.9L Cummins Intercooler

Dodge 5.9L Cummins Intercooler Pipe & Boot Kit

Mishimoto intercooler dyno testing

We included a teaser shot of our prototype cooler toward the end of our last update. Now it is time to provide a more in-depth look at our intercooler.

E46 3-Series Aluminum Expansion Tank, Part 2: 3D Tank Design

Posted: April 30, 2015

Categories: BMW 3-Series E46 Expansion Tank 1999-2006

Tags: turbo, track, scca, radiator, race, mishimoto, m54, featured, expansion, cooling, #bmw

Quick project update! As noted in our last post, we had finished collecting data points and dimensional information for the stock tank and were setting our sights on creating a tank of our own.

After pulling our engineers out from under shop vehicles, we set them behind the computer to get this project moving. Check out some of our initial 3D models!

Mishimoto expansion tank, 3D model

BMW E36 Aluminum Coolant Expansion Tank R&D, Part 2: Initial 3D Model and Prototype

Posted: April 30, 2015

Categories: BMW 3-Series E36 Expansion Tank 1992-1999

Tags: turbo, track, scca, radiator, race, mishimoto, m54, featured, expansion, cooling, #bmw

Interested in picking up this aluminum E36 expansion tank? Check out our product page linked below!

BMW E36 Aluminum Coolant Expansion Tank!

Time to break open the stock tank and see what lies within. If you follow some of our other development projects, you would know that we recently split an E46 3-series expansion tank and found quite a complex system including both internal and external features. Although this added some complexity and difficulty to the project, it seemed like our engineers enjoyed the challenge.

Stock Expansion Tank Internals

First, before we slice this guy in half, a look inside the tank from the cap.

Mercedes CLA45 AMG Intake R&D, Part 2: Full Prototype Fabrication

Posted: April 29, 2015

Categories: Mercedes-Benz CLA45 AMG Intake 2014+

Tags: turbo, teammishi, mishimoto, mercedes, intercooler, intake, featured, benz, amg

Interested in picking up our Mercedes CLA45 intake system? Check out our product page for more details.

Mishimoto Mercedes-Benz CLA45 AMG Performance Air Intake

Mishimoto intake 3D render

When we last left off we had finished the evaluation of the stock intake system, and the design of our prototype had commenced. Our first component is the turbocharger inlet tube, which mounts to the compressor inlet. Check out a few shots of our 3D-printed design!

Inlet Tube

A New BMW F30 Performance Intake, Part 1: Stock Intake and Initial Fabrication

Posted: April 24, 2015

Categories: BMW 3-Series F30 Intake 2012+

Tags: turbo, teammishi, n26, mishimoto, mishi, featured, f30, directinjection, #bmw, #bimmer

Interested in purchasing our F30 intake system? Check out our product page for more information!

Mishimoto BMW F30 Performance Intake!

BMW F30 on dyno

After wrapping up some loose ends with our E36 and E46 projects, it was time to turn our attention to one of the new offerings from BMW. The 4-cylinder turbo N20/N26 caught our eye as a very interesting new engine, and we decided to bring one into the shop for an initial look at the vehicle and to begin developing a few products for this chassis.

Stock Intake System

Before pulling out the welder and aluminum, we needed to evaluate the stock intake system to determine our

Developing A N54 Catch Can Solution, Part 3: Final Design and Features

Posted: April 23, 2015

Categories: BMW 1-Series E8X 135i Catch Can 2008-2010, BMW 1M Catch Can 2011, BMW 3-Series E9X 335is Catch Can 2011, BMW 3-Series E9X 335i/xi Catch Can 2007-2010

Tags: turbo, teammishi, n55, n54, mishimoto, mishi, featured, directinjection, #e90, #bmw, #bimmer, #335i, #135i

Interested in picking up our N54 oil catch can system? Check out more details on our product page linked below!

BMW N54 Baffled Oil Catch Can Kit

After selecting a catch can location and fabricating a mounting bracket, we needed to fully install the can/bracket combo and begin putting together a set of CCV lines to complete our kit.

Catch Can Lid

Before doing so, the functional prototype of our catch can lid arrived for evaluation by our team. Check it out!

Mishimoto CNC-machined catch can lid

The Mustang EcoBoost Intercooler, Part 5: Finished Product and Final Testing Data

Posted: April 22, 2015

Categories: Ford Mustang 2.3L EcoBoost Intercooler 2015+

Tags: turbo, svo, s550, mustang, merica, intercooler, ford, featured, ecoboost, domestic, 2.3

Interested in picking up this awesome Mustang EcoBoost Intercooler? Check out our product page for more details!

Mishimoto Mustang EcoBoost Performance Intercooler

Mishimoto intercooler

Thanks to everyone who has followed our journey thus far. With a ton of testing and design work complete, we finally had our intercooler design ready for testing. We've leaked a few cool shots on the forum; check out more of the detailed images below.

Mishimoto Final Design

Drop Intake Temperatures. Drop Track Times. Drop Jaws. The Ultimate Guide For Intercooler Selection!

Posted: April 22, 2015

Categories: Technical Articles

Tags: turbo, teammishi, team mishi, mishimoto, intercooler, featured, dynojet, diesel, cooling, CAC

What intercooler should I get? Is this a good intercooler? What horsepower gains will I see with this intercooler? Is a universal intercooler right for me? We all see these questions on Internet message boards, and we even hear them in friendly discussions with fellow car folk. Instead of responding with a face palm, we need your help to educate the masses on how an intercooler works. Knowing what makes a great intercooler great is powerful knowledge that can help you select the best cooler for your project.

The goal of this article is to explain intercooler systems, designs, features, and testing procedures, so that you can more easily select the intercooler that meets your needs. Don’t be that guy with a massive front-mount intercooler on a completely bone-stock vehicle complaining about boost lag. Check out the guide below to educate yourself, your friends, relatives, maybe even that guy at work claiming his three-fifty will blow the

Mustang EcoBoost Aluminum Radiator R&D, Part 1: Initial Development

Posted: April 20, 2015

Categories: Ford Mustang 2.3L EcoBoost Aluminum Radiator 2015+

Tags: turbo, svo, s550, mustang, merica, ford, featured, ecoboost, domestic, 2.3

Interested in purchasing this awesome aluminum radiator? Check out more details on our product page linked below!

Mishimoto Ford Mustang EcoBoost Performance Aluminum Radiator

In an effort to give your Mustang optimal cooling performance, the bright minds at Mishimoto have embarked upon a mission to develop an efficient radiator solution for the EB. It is only a matter of time before high-powered EcoBoost models begin hitting the track, necessitating a cooling solution that outperforms the stock radiator.

Luckily we have our own 2015 Mustang shop vehicle for product design and testing. We also have a local enthusiast who is kind enough to loan us his automatic EcoBoost for test fitting with the transmission cooler location on the S550.

Stock Radiator

EcoBoost owners have two radiator options from the factory. The Performance Package (PP) models are equipped with

Keeping The E36 Cool, Part 3: Final Prototype

Posted: April 17, 2015

Categories: BMW 3-Series E36 Electric Fan Shroud 1992-1999

Tags: turbo, track, scca, s52, radiator, race, m50, m20, featured, euro, e36, e30, cooling, #m3, #bmw

Interested in picking up our E36 fan shroud? Check out the full details on this kit on our product page!

Mishimoto BMW E36 Performance Fan Shroud Kit!

Our final prototype is complete and looks fantastic. The fan mount is constructed from 1/8" steel that has been cut to a specific shape allowing for additional airflow through the radiator core at speed. Additionally, the mount is powder coated black to provide a durable finish. As noted in our last post, we tested this unit extensively with our 16" fan to ensure that coolant temperatures were properly regulated during both idle and all driving conditions.

Check out a few shots of the mount!