BLOG CATEGORIES

mishi

  1. Piping Hot - Exhaust R&D, Part 6: Pure, Unadulterated, Awesomeness

    Piping Hot - Exhaust R&D, Part 6: Pure, Unadulterated, Awesomeness

    The last piece of this puzzle has finally fallen into place. Finishing off our offerings for the 2016+ Chevy Camaro SS exhaust systems lands us here with our Race Axleback. The SS has an unmistakable sound, and it's a sound we don't want to stray far away from - we only want to enhance it in the most robust way possible, and I feel that the engineers have done just that.

    I'll make this simple - this exhaust is mean.

    _MG_4196r

    It's a mix of a modern sounding V8 with the raspy aggressive tone of a certain 1970's-era machine that was made of steel, had belt-buckle seat belts and a bad attitude. When this car starts up, it will give unassuming bystanders a jump - I've seen it happen at gas stations when I got to drive it. There are no fancy tricks here, just a raw, unrestricted, unfiltered

    Continue Reading »
  2. Cooler Than Winterfell - Intercooler R&D, Part 2: Prototype Core

    Cooler Than Winterfell - Intercooler R&D, Part 2: Prototype Core

    It looks like mother nature is giving the tell-tale signs to us gearheads that it's time to get ready for track season. The weather is getting warmer and tracks all around the country have kicked off calendar seasons with maiden 2017 events already in full swing. A common mod many of us who are boosted, especially ST owners, want during this time of year is the intercooler. The 2013+ Ford Focus ST features quality design for its the factory intercooler, but improved efficiency is something we like to target. In the last update, we talked about the shortcomings of the factory core and how we plan to make an even more efficient intercooler. Now that we have received our production samples for the first time, we can get into the details of the design plan and what our goals are to improve performance.

    Continue Reading »
  3. We Get Around - Catch Can R&D, Part 6: Cadillac Field Trip

    We Get Around - Catch Can R&D, Part 6: Cadillac Field Trip

    Though the winter continues to perpetuate chilly weather and monotonous gloom here on the east coast, the future is looking bright for our Mishimoto 2013+ Cadillac ATS catch can kit. After a nice visit to the local Porsche dealership (yes, you read that correctly), armed with some anomalous 50◦ January sunshine, several delicious sandwiches, and our final ATS prototype catch can kit, we've determined that our fitment is just about spot on.

    For those of you just catching up with us now (I crack myself up), this ATS kit is largely the same as our Camaro 2.0T catch can kit, which is now on pre-sale"don't worry, the ATS pre-sale is not far behind!

    However, to properly fit the Caddy, we needed to design a bespoke set of ATS-specific brackets and hoses.

    Continue Reading »
  4. American Workhorse - Part 3: Looks that Kill

    American Workhorse - Part 3: Looks that Kill

    So far, we've examined chassis flex on the 6.4 Super Duty trucks and we've taken a look at our solution in its construction, design, and testing. As our Mishimoto 6.4 Upper Radiator Support Bar pre-sale comes to an imminent close, I've got just a bit more to share!

    upper radiator support bar

    Namely, I think it's time we show you some trucks! As I've mentioned before, we've been working with numerous 6.4 owners to test this bar out, and things have gone great so far. The bars have seen many thousands of miles, and we've had some of our satisfied testers send in some cool shots of their support bars installed on the trucks.

    Check them

    Continue Reading »
  5. Makin' Our Camaro Purr - Catback R&D, Part 1: Stock Review

    Makin' Our Camaro Purr - Catback R&D, Part 1: Stock Review

    Here I stand, firmly within the land of people who spend egregious amounts of money on car parts, as I look back and wonder how in hell I got here. Those of us in my position often place the blame on a nasty little creature called the "mod bug."

    The mod bug, as they say, is a tricky little bastard. Though you may think most damage-imposing biting insects live in Australia, I can assure you, this one is alive and well in the Americas. I've had firsthand experience as a victim, and it isn't pretty - just ask my bank account.

    The feeling of that bug biting for the first time is unforgettable. At the beginning, you say "just an exhaust and springs, and then my car'll be perfect". Enter mod bug. Before you know it, you're dropping a Ferrari engine in your wide-body FR-S.

    Continue Reading »
  6. Eliminating the Eyesore - Expansion Tank R&D, Part 4: Final Form

    Eliminating the Eyesore - Expansion Tank R&D, Part 4: Final Form

    They say that good things come to those who wait, and we'd certainly say that's the case with the Mishimoto 2016+ Camaro expansion tank. Note that I did not specify "SS" here. This tank also fits on the 2.0T, but we haven't gotten a change to test it out on a V6 model yet, though it should fit. If any V6 owners are local to the Philadelphia area and want to come on by for a test fit so that we can be 100% sure, please reach out!

    We've tested the tank on both of our Camaros, and we've gone through several stages of refinement, ultimately ending up with quite the fine-looking aluminum piece. Oh, and did I mention it's already on Pre-Sale?

    Mishimoto 2016+ Camaro Expansion / Overflow Tank Pre-Sale

    Let's take

    Continue Reading »
  7. American Workhorse - Part 2: Putting Innovation to the Test

    American Workhorse - Part 2: Putting Innovation to the Test

    Welcome to the second blog post detailing the development of the Mishimoto 6.4L Powerstroke upper radiator support bar. Last time, we looked at why front-end chassis flex in the 6.4 Super Duty has the potential to exceed a safe magnitude, using our advanced American architecture as a comparison. We learned that too much flex spells possible consequences, so we made it our goal to stiffen things up. But how did we do it?

    We did it in the most American way possible - through innovation.

    The Mishimoto 6.4 not only serves as an engineering platform, but also as a useful tool during construction of our new R&D center.
    The Mishimoto 6.4 not only served as a great testing and engineering platform, but also as a useful
    Continue Reading »
  8. No One Likes a Leaking Cap - Washer Fluid Reservoir R&D, Part 2: Improving on OEM

    No One Likes a Leaking Cap - Washer Fluid Reservoir R&D, Part 2: Improving on OEM

    When we began work on our 2016+ Miata washer fluid reservoir, our primary goal was to improve the aesthetics; we designed the tank to look killer, make your engine bay a little cleaner, and we also reduced the volume of the reservoir, saving a few pounds versus stock if you're comparing a full Mishimoto tank to a full stock tank.

    One of the major benefits of sharing our R&D process among enthusiast communities is the opportunity to learn even more about what we can do to make the best possible product. Once I revealed our reservoir to the forums, I was quickly made aware that there is an annoying flaw with the stock tank: a leaking cap!

    Preparing our new solution for testing
    Preparing our new solution for testing
    Continue Reading »
  9. A Real F-150'n Beaut'! - Intercooler R&D, Part 4: Final Aesthetic Form

    A Real F-150'n Beaut'! - Intercooler R&D, Part 4: Final Aesthetic Form

    As we approach the holidays, I want to get into the giving spirit by sharing some photos with you of how our final 2015+ F-150 EcoBoost intercooler will look. But first, I'd like to thank you all for your patience. This is a busy time of year, and the R&D for this intercooler has been an iterative one, but quality takes time and we've got a part on our hands that looks fantastic - I'm sure you'll all agree. You can see evidence of this by checking out our 2011-2014 EcoBoost Intercooler!

    Last time, we 3D-printed some EcoBoost intercooler end tanks and sized up some foam to represent our intercooler core. For all our projects, this step in the process serves not only to save resources, but also to give us some flexibility in changing

    Continue Reading »
  10. ReSpiration Focal Point - Performance Intake R&D, Part 5: C'est Fini

    ReSpiration Focal Point - Performance Intake R&D, Part 5: C'est Fini

    This 2016+ Ford Focus RS Performance Air Intake is now available! Click here to check it out!

    Here it is, the final hoorah. The production sample of our intake kit for the 2016 Ford Focus RS is here at last. In the last update, we took you guys through what this intake sounds like with the help of some dyno runs; it sounds awesome and it made 11hp and 15ft-lbs of torque! I'm happy that you guys have stuck with me through the long development process, but there is a light at the end of this R&D tunnel. I know you guys want to see what the finished product looks like, so let's check it out.

    Continue Reading »
Page