BLOG CATEGORIES

mustang

  1. Stranger Danger - Baffled Oil Catch Can R&D, Part 2: A Canned 'Stang

    Stranger Danger - Baffled Oil Catch Can R&D, Part 2: A Canned 'Stang

    Our engineer has advanced engineering tools at his disposal. Arguably, one of the coolest in our facility's arsenal is our scanning device. This high-tech piece of equipment allows our engineer to scan anything in 3D space into a computer file. The file is then uploaded to a computer so the engineer can design whatever they want within the 3D space they scanned. The fine-tuned hands-on engineering element is still there, it's just done a lot faster and just as accurate with this machine.  We call this contraption the Faro Design ScanArm and we have a full, detailed writeup on how it works. Cool technology aside, let's get into the design of this catch can kit.

    The scan-arm at work!
    The scan-arm at work!

    Continue Reading »
  2. Stranger Danger - Baffled Oil Catch Can R&D, Part 1 - Design Plans

    Stranger Danger - Baffled Oil Catch Can R&D, Part 1 - Design Plans

    Our engineers at Mishimoto are no strangers to the dangers of oil blow by. We have well-documented evidence that this is still a common threat to most modern direct injected vehicles. For those of you that don't know, blow-by is a byproduct of compression and combustion. Blow-by is created when oil and fuel vapors push past the piston rings and into the crankcase during compression. To keep the crankcase depressurized from this oil and fuel, there needs to be some sort of venting. This is accomplished by routing this blow-by through the intake tract and right back into the cylinder to be burned during combustion.

    Even though this particular engine uses port injection, which sprays fuel directly onto the valves, the problem still lies within the venting process. By rerouting blow-by through the intake tract, there is a potential for accumulating carbon deposits on your valves in addition to a nice thin coating of oil along the inside walls of your intake (and turbo if applicable). The

    Continue Reading »
  3. The Mustang GT Intake R&D, Part 4: Seeing is Believing

    The Mustang GT Intake R&D, Part 4: Seeing is Believing

    Click here to get your Mustang GT Intake!

    As 2016 approaches its end, I can't help but reminisce. It's been a wild ride and a lot has changed. We have a new president-elect, the Olympics took place in Brazil, Kim Kardashian was robbed at gunpoint, Ryan Lochte lied about being robbed at gunpoint, and Leo finally got his Oscar. You know what hasn't changed? Our resolve to make awesome parts for our automotive community.

    It was May 3 when we announced that we were going to make an intake for the 2015 Ford Mustang GT. I know it feels like the updates for this project have been trickling in at a slow pace, but quality takes time. In our last update, we went through the rigorous testing our prototype endured, including pressure drop, dyno and road testing, so we could be confident in our results. The production sample has finally arrived at our R&D facility and it looks great. Our lead engineer has installed a finished production kit on our GT,

    Continue Reading »
  4. Keep your Cool- Transmission Cooler R&D, Part 3: Test Results

    Keep your Cool- Transmission Cooler R&D, Part 3: Test Results

    The yellow GT is back in our R&D facility to show us a thing or two about testing trans coolers. Upon the GT's arrival, we wasted no time getting the pony car saddled with our testing rig.

    Mustang GT on the dyno for transmission cooler testing
    Mustang GT on the dyno for transmission cooler testing

    Mustang GT on the dyno for transmission cooler testing
    Mustang GT on the dyno for transmission cooler testing

    We couldn't have asked for a better day for our Mustang transmission cooler testing. We began testing on

    Continue Reading »
  5. The First State's First Drift Event

    The First State's First Drift Event

    To those of us who call drifting a passion, we know that there is something familiar about the hours before a drift event. It's a feeling that we know all too well. The last-minute push to get your car ready and load everything. Floor jack, tire pressure gauge, tires; everything. Most importantly, making sure your car is actually in the right condition to pass the track's technical inspection (tighten your lug nuts!). Once you're over the feeling of rushing to get yourself and the car ready, excitement overcomes you from then on. All that's left is to get to the track.

    If you know the track that you're about to shred, you know exactly what you're in for. The layout, the paddock area, the people, the rules; all are familiar ground for you. You feel a sense of ease wash over you as you arrive. All of the long hours of preparation and traveling. The lack of sleep and the dwindling number that is your bank account. It all leads up to this. Every moment that has brought you here to this

    Continue Reading »
  6. The Mustang GT Intake R&D, Part 3: Data Crunch

    The Mustang GT Intake R&D, Part 3: Data Crunch

    It may seem that we have been dormant on this project, but trust me, the activity around this 2015 Mustang GT intake could not be more alive! In this update, I'll outline the results of the extensive R&D we put this prototype through. Our Mustang's V8 Coyote motor has spent a lot of time running with this our prototype intake, and we wanted to document the many steps along the way of this research. Our engineers believe they have tweaked this product to its full potential. So let's dive right in!

    The GT looks ready
    The GT looks ready!

    We wanted to look at several things in this car. We know a few intake kits out there require tunes to run with this S550. One of our priorities was to ensure that this this intake would safely run on a stock tune

    Continue Reading »
  7. Keep your Cool- Transmission Cooler R&D, Part 2: Prototype Fitment

    Keep your Cool- Transmission Cooler R&D, Part 2: Prototype Fitment

    In our last post, we took a look at the stock Mustang automatic transmission cooler and our plans to make it even better. We designed the cooler in Solidworks, based off the measurements obtained from both the GT and the stock cooler. We will be doing our R&D with this bold yellow GT, but based on our research, this cooler will fit all models of S550 Mustang including the EcoBoost and V6. But enough about fitments, the prototype is complete! It is time to see how well our digital design translated into a real-life prototype.

    Mishimoto Mustang trans cooler
    Mishimoto Mustang trans cooler

    So far the trans cooler is looking good. It is much larger than the stock cooler, 50% larger to be exact. The stock cooler comes in at 10 rows, where the

    Continue Reading »
  8. Keep your Cool - Transmission Cooler R&D, Part 1: Prototype Design

    Keep your Cool - Transmission Cooler R&D, Part 1: Prototype Design

    Over the past year we have been getting acquainted with our Mustang GT, and in the process we've developed an entire line of cooling products for it. In the spirit of staying cool, we are on to our next project, the Mustang GT Automatic Transmission Cooler.

    Donor vehicle for Mustang GT trans cooler testing
    Donor vehicle for Mustang GT trans cooler testing

    Heat is generally the enemy of an automatic transmission. In fact, the Ford factory service manual notes that when the GT's computer senses the transmission overheating, it will limit RPMs until the temperature returns to a normal range. There is nothing worse than a track day ending early due to high temps of any kind, including in the transmission. Whether you are taking your GT to the track

    Continue Reading »
  9. Working on a Cooler Coyote- Oil Cooler R&D, Part 4: Testing

    Working on a Cooler Coyote- Oil Cooler R&D, Part 4: Testing

    In our last post we took a look at the fabrication of our all-new bar-and-plate oil cooler designed specifically for this project. Now that we have our coolers complete, it is on to testing. We will test our large bar-and-plate cooler, our small bar-and-plate cooler, and our traditional-style 19-row cooler. This will allow us to compare the effectiveness of our new design to the excellent heat exchangers we already offer.

    Testing

    We installed each version and gave them a chance to show us what they could do in not one, but two arenas of performance. Round 1 Fight!

    Contenders:

    • 19-Row Mishimoto Oil Cooler
    • Small cross-flow bar-and-plate cooler
    • Small dual-pass bar-and-plate cooler
    • Large cross-flow bar-and-plate cooler
    • Large dual-pass bar-and-plate cooler

    We hooked up our 19-row cooler to our GT, as well as our all new bar-and-plate coolers, both large and small, and let them duke

    Continue Reading »
  10. Upgrading Induction - Induction Hose R&D, Part 2: From Concept to Reality

    Upgrading Induction - Induction Hose R&D, Part 2: From Concept to Reality

    We are now one step closer to completing this induction project! The bulk of our testing is just about finished and we have gotten some awesome results. One of our biggest objectives was to increase the internal volume over the stock intake. With more air surging through the hose, the potential for improved power output is increased as well.

    Prototype 3D printed 2015+ Mustang parts
    Prototype 3D printed 2015+ Mustang parts

    The sound imposer is blocked off here, but it will be deleted!
    The sound imposer is blocked off here, but it will be
    Continue Reading »
Page