Page 2 - ford

When you're hurtling towards a concrete-walled turn at over 90 MPH, you'd better know that every nut and bolt in your car is torqued to spec.

Photo: Nick Thomas

We've all had to prepare for something before"a date, an interview, a test. It's always a stressful experience. Now imagine you were about to go on a date with somebody you were pretty sure is trying to kill you. Or, imagine that your desk would be pushed off a 100ft cliff if you failed that test. Preparing for a track day is a lot like that.

About a week before our Focus RS

Many of you have been asking about the status of this project, and I have concrete information and data for you to look over as you make your decision on an intercooler for summer 2017. In the last update (which, I know was a while ago), we left you with what the final design of the core looked like, complete with renders and studio shots of the physical production sample.

The project's lead engineer knows that any intercooler design should be able to live up to the demanding performance these trucks require during, off-road or work use, daily driving, and even towing vehicles. Our engineer tested three cores, all with slightly different design aspects, so our R&D bases would be covered. Each core consisted of a bar-and-plate construction, as they are much stronger by design and go with the tough theme of these trucks.

The core we decided to go with gave us a 77% increase in core volume and a 163% increase in external fin surface area - not a mild improvement by any means.

These intercooler pipes are now available!
Click here to buy them from our website!

As the old cliché goes, some things just go together like peas in a pod. Peanut butter and jelly. Cold beer and tailgates. Intercoolers and intercooler pipes; you just can't have one without the other. If you followed along with our 2011-14 F-150 EcoBoost intercooler thread, you've probably been waiting for an update on our intercooler pipes for a while now. Well, the wait is over.

Fabrication

In the last post, fabrication ended for our prototype cold-side pipe. Since then, we've been busy fabricating the hot-side piping and testing. Steve and Mike whipped up a hot-side prototype using the same process as the cold-side

Everything about Ford's Super Duty Powerstroke brand screams, well, Super Duty. It has done so since they were first put in the Econoline Vans in the mid "90's. Our 2011 is equipped with the 6.7L turbodiesel V8 engine, and it's clear Ford has engineers who really took the Super Duty term to heart. There are two batteries, two radiators, two thermostats, two coolant expansion tanks, an engine oil cooler, a transmission oil cooler, an EGR cooler - this truck even has a fuel cooler. Just looking at the engine bay of this monster can be a bit daunting, especially to a guy used to dealing with smaller, beat up, four-cylinder engines. Fortunately, our engineers are well-versed in the nuances of this truck, as we already have many items out on the market for this application including a full charge pipe

The mood for the past few days here at the Mishimoto office has been a little giddy.  Scrawled on our calendar in one of our project manager's less than impeccable handwriting are the words "Focus RS track testing".  There's a lot of hard work being done, but underneath it all lies a childlike wonder for what's going to happen in the next week.

We've spent countless hours street testing over the past several weeks, trying to learn more about the relationship between the PTU, ECU, and RDU.  We've learned a lot from this testing, but we're finding that we can't push the car hard enough on the street to match what you all are seeing at the track, without getting arrested anyway.  So, we're gearing up for another track day to push the RS and its PTU and RDU to their limits.

Sometimes there are products we can't wait to get on the market. The sense of urgency follows positive feedback after a release or hinting at a recently started project. There's pride in giving people what they want, what they need. When our 2003-2007 6.0L Powerstroke Transmission Cooler Kit was released, the question that kept coming was if it would fit the 7.3L. What followed was a "no, sorry." That didn't sit well with us. The efforts grew exponentially as more questions surfaced about fitment, and as the number of requests to make a direct fit kit increased.

In retrospect, it would have been best to provide all you 7.3L owners with upgraded cooling when the transmission cooler first launched. The reason why our 6.0L kit wasn't on option then was due to the hose routing. The lines are different. The 6.0L already has hoses that can adapt to our cooler without the necessity of lines from us. The inlets and outlets are in different spots here, so we needed to carefully design hoses that

Our engineers at Mishimoto are no strangers to the dangers of oil blow by. We have well-documented evidence that this is still a common threat to most modern direct injected vehicles. For those of you that don't know, blow-by is a byproduct of compression and combustion. Blow-by is created when oil and fuel vapors push past the piston rings and into the crankcase during compression. To keep the crankcase depressurized from this oil and fuel, there needs to be some sort of venting. This is accomplished by routing this blow-by through the intake tract and right back into the cylinder to be burned during combustion.

Even though this particular engine uses port injection, which sprays fuel directly onto the valves, the problem still lies within the venting process. By rerouting blow-by through the intake tract, there is a potential for accumulating carbon deposits on your valves in addition to a nice thin coating of oil along the inside walls of your intake (and turbo if applicable). The

I told you this project was going to move fast. In the last update, we laid down our design plans for how we will give this RS coolant expansion tank some sprucing up. Not only did we make the tank more pleasing to look at, we also increased the capacity and added a neat sight tube so you can check your levels with ease. You guys have been asking for it, so let's get up close and personal.

The stock unit pales in comparison to the size of the Mishimoto tank.

One of the first things you'll notice with this tank is the capacity increase over the stock unit. We are making this tank to fit both the Focus RS and ST, but that doesn't mean we have to stay within the size parameters