Page 4 - race

During the development of our new intake system for the 1999-2005 BMW 3-series, we identified yet another component that would be a vital upgrade as the E46 chassis begins to age (gracefully though, right?). With a lack of support in offerings for a silicone E46 intake boot set, we decided to design a set that would replace the failure-prone stock rubber units. If you've ever owned a BMW (E30, E36, E46, etc.) that utilizes such rubber intake elbows and hoses, you may have experienced failure at some point. Typically the area of flex begins to develop cracks and tears over time. The unmonitored air entry results in a rough running straight-six " not exactly ideal. So let's get to the project!

Stock Intake Boots

First, check out the factory-equipped boots!

Interested in picking up our E46 intake system? Check out our product page for more information!

Mishimoto BMW E46 Performance Air Intake

Final Intake Images

With successful testing data acquired from our first prototype, it was time to make a final prototype and perform our last test fit before producing a batch of final intake systems. Check out a shot of the shroud, intake hose, and filter!

Mishimoto E46 air intake shroud, intake hose, and air filter

The airbox is constructed of powder-coated steel, and we line the

Interested in picking up this aluminum E36 expansion tank? Check out our product page linked below!

BMW E36 Aluminum Coolant Expansion Tank!

The time has come and the anticipation is over. Our final prototype unit has been constructed, and we are ready to check fitment! On to the pictures!

Final Expansion Tank Images

Mishimoto expansion tank prototype

Interested in picking up our E46 intake system? Check out our product page for more information!

Mishimoto BMW E46 Performance Air Intake

After completing our initial prototype it was time to strap this E46 to the dyno and make a few pulls. We would be evaluating power output, monitoring vital engine sensors such as AFR, and collecting sound clips for comparison against the stock intake system.

Dyno Testing

E46 on dyno for intake testing

Quick project update! As noted in our last post, we had finished collecting data points and dimensional information for the stock tank and were setting our sights on creating a tank of our own.

After pulling our engineers out from under shop vehicles, we set them behind the computer to get this project moving. Check out some of our initial 3D models!

Mishimoto expansion tank, 3D model

Mishimoto expansion tank, 3D model

Interested in picking up this aluminum E36 expansion tank? Check out our product page linked below!

BMW E36 Aluminum Coolant Expansion Tank!

Time to break open the stock tank and see what lies within. If you follow some of our other development projects, you would know that we recently split an E46 3-series expansion tank and found quite a complex system including both internal and external features. Although this added some complexity and difficulty to the project, it seemed like our engineers enjoyed the challenge.

Stock Expansion Tank Internals

First, before we slice this guy in half, a look inside the tank from the cap.

Interested in picking up our E36 fan shroud? Check out the full details on this kit on our product page!

Mishimoto BMW E36 Performance Fan Shroud Kit!

Our final prototype is complete and looks fantastic. The fan mount is constructed from 1/8" steel that has been cut to a specific shape allowing for additional airflow through the radiator core at speed. Additionally, the mount is powder coated black to provide a durable finish. As noted in our last post, we tested this unit extensively with our 16" fan to ensure that coolant temperatures were properly regulated during both idle and all driving conditions.

Check out a few shots of the mount!

Final

Interested in purchasing our E46 aluminum radiator? Check out our product page linked below!

Mishimoto BMW E46 Non-M Performance Aluminum Radiator!

3D Modeling

After some serious 3D modeling work in Solidworks, our first prototype unit is complete. Let's check out a few of the renders!

Mishimoto E46 3-series aluminum radiator 3D model

" width="300" height="283">

Enthusiast groups' feedback plays a massive role in our product development process. Not only is it a great way to bounce ideas off our potential customers, but it also allows us to see exactly what our customers want and need for their vehicles. This project is no different. Due to a substantial amount of demand via forums and social media, we decided it was time to get the ball rolling on this coolant expansion project.

Stock Expansion Tank

In typical BMW fashion, this tank was quite unique and featured some very interesting components, both internally and externally. First, a look at the exterior of the tank. Many of you are very familiar with this, based on the rate of failure reported for this plastic tank.