Page 5 - wrx

Interested in purchasing our Subaru WRX or STi intercooler kit? Check out more details on our product pages linked below!

Mishimoto Subaru WRX/STi Front-Mount Intercooler, 2001-2007

Mishimoto Subaru WRX Front-Mount Intercooler, 2008-2014

Mishimoto Subaru STi Front-Mount Intercooler, 2008-2014

Modifying your Subaru can be quite a slippery slope, especially when this wonderful pastime turns from a hobby to an obsession. Luckily, the enthusiast community is huge and always ready to provide support (or laughter), even when your

Interested in purchasing our thermostatic WRX oil cooler? Check out our product page for more information!

Mishimoto Subaru WRX Oil Cooler Kit

After releasing our most recent direct-fit oil cooler kit for the 2015 Subaru WRX, questions from our fan base and online communities began to fill our inboxes. Our kit included all necessary components for installation and placed a large 19-row oil cooler in the front grille area. We saw huge gains in cooling performance for this particular setup, with decreases of over 25°F. This project was extremely successful and we anticipated that our customers would be very pleased with the performance. The primary concern with a portion of enthusiasts was low fluid temperatures. This kit was designed with a vehicle-specific oil sandwich plate that sat on top of the factory oil cooler/warmer.

This was a truly unique design, however the one feature this component lacked was an

Interested in purchasing our WRX catch can kit? Check out more details on our product page linked below!

Subaru WRX Baffled Oil Catch Can System

The final kit is ready for installation! After months of development and test fitting, we finally had our completed prototype components ready for fitment verification prior to mass production. Check out all of the components below!

First, the passenger side catch can bracket for the PCV system.

Final PCV catch can bracket

Next up is the finished version of our dual port catch can!

Interested in purchasing our 2015 WRX aluminum radiator? Check out our product page for more information!

Mishimoto Subaru WRX Performance Aluminum Radiator

Now that we had a finalized prototype, it was time to test this component to ensure that our improvements over the stock unit resulted in real-world advantages for our customers. An aluminum radiator provides the instantaneous benefit of increased reliability over the stock plastic unit. Despite this, cooling performance is always our primary goal with a heat exchanger.

Prior to actual road testing, our engineering team put together a few charts illustrating the improvements over the stock radiator.

" width="300" height="174">

Interested in purchasing our WRX catch can kit? Check out more details on our product page linked below!

Subaru WRX Baffled Oil Catch Can System

Time to start designing brackets! After a quick recap of the project goals, our creative engineering team began brainstorming. First, they selected a location for the catch can on the PCV valve side. It would need body mounting points for the can bracket, and preferably a short route for the hose so as not to complicate the engine bay. Our goal is a clean installation that appears stock-like, not a medusa of hoses routed about the engine bay.

The PCV valve on the 2015 WRX is located under the intercooler toward the rear of the engine block. You can see it in the image below, taken during a later stage of development of this kit.

Interested in purchasing our 2015 WRX aluminum radiator? Check out our product page for more information!

Mishimoto Subaru WRX Performance Aluminum Radiator

No need for an introduction, let's check out our second prototype!

Mishimoto prototype 2 radiator

Mishimoto prototype 2 radiator

Interested in purchasing our WRX catch can kit? Check out more details on our product page linked below!

Subaru WRX Baffled Oil Catch Can System

If you follow our engineering blog or are involved with any of our social media outlets, you should be well aware of the new baffled oil catch can we recently released. This new product features a much smaller footprint compared to our existing catch can, allowing for fitment in tighter engine bays.

While developing this catch can, we wondered about using it in direct-fit kits for popular vehicles. For most drivers, a catch can is a DIY project requiring only the routing of hoses and fabrication of brackets for mounting the can. Installing a DIY setup that appears like it was made for the vehicle can be quite a challenge. This is where we come in, to take the guesswork out of a catch can installation. We are planning to provide mounting brackets, hardware,

Interested in purchasing our 2015 WRX aluminum radiator? Check out our product page for more information!

Mishimoto Subaru WRX Performance Aluminum Radiator

Now that we had our first prototype unit in, it was time to evaluate fitment and determine if any changes were necessary when compared to the stock unit. First, we swapped the shrouds to see if any fitment issues existed because of the added size of the Mishimoto unit.

Mishimoto prototype 1 (right) fan shroud fitment

Interested in purchasing our WRX transmission cooler? Check out our product page for more information!

Mishimoto Subaru WRX CVT Transmission Cooler

For our third prototype unit for the CVT cooler, we decided to take a more traditional approach. We would place the cooler in a location that would guarantee airflow. The main concern was fitting our large 19-row cooler in a position that would not leave any space for other aftermarket components. First, we mocked-up the cooler and developed some basic brackets that would place the cooler in an angled position behind the upper grille area. Check out a few shots of the mounted cooler!

Interested in purchasing our 2015 WRX aluminum radiator? Check out our product page for more information!

Mishimoto Subaru WRX Performance Aluminum Radiator

The new 2015 WRX is a great toy for both daily use and as a weekend track warrior. The introduction of the FA20DIT into the WRX chassis has been well received, and from the reviews thus far, Subaru has done a great job with the new model. Although some might disagree with the styling, overall the car handles and performs very well. As for value, the 2015 model is a pretty decent bang for your buck. For those looking to track their brand new vehicle, a few bolt-on modifications will raise power levels significantly. A simple intake and tune will raise power to 275+ whp, which is a huge increase over the 210 whp we saw from a completely stock vehicle. Reaching 300 whp is potentially obtainable with a few additional exhaust modifications. We are