Page 8 - oil

Interested in picking up our 2015 WRX FMIC kit? Check out more details on our product page linked below!

Mishimoto Subaru WRX Front-Mount Intercooler Kit

15' WRX testing

Already outgrowing the efficiency of your 15' WRX top-mount intercooler setup? Planning for some big power in the near future? Sounds like your Subie needs an efficient front-mount intercooler (FMIC)! Luckily, our team has been working to develop this product for months. Check out the process below!

Intercooler Design

Our team decided to start this product with the design

Interested in purchasing our 2015 WRX top-mount intercooler kit? Check out more details on our product page linked below!

Mishimoto Subaru WRX Performance Top-Mount Intercooler and Charge-Pipe System

Size Comparison

Before installing our prototype cooler on one of our 2015 WRXs, we decided to take a few shots showing the huge size difference of our cooler compared to the stock unit.

Mishimoto prototype intercooler (left) and stock intercooler (right)

Interested in purchasing our 2015 WRX cat-back exhaust? Check out more details on our product page linked below!

Subaru WRX/STi Cat-Back Exhaust

Prototype Fabrication

With the front section of our exhaust complete, we needed to address the Y-section as well as the pipes routing to the mufflers. We decided to go with 2 1/4" piping following the Y-section, which matches the diameter of the STi system.

Check out a couple shots from the fabrication process.

Fabricated muffler section

We bent a few more hangers for attaching the mufflers to the appropriate stock locations.

Interested in purchasing our 2015 WRX top-mount intercooler kit? Check out more details on our product page linked below!

Mishimoto Subaru WRX Performance Top-Mount Intercooler and Charge-Pipe System

3D Modeling

Now that the stock intercooler has been evaluated and modeled, we began designing our own cooler. Check out some of the initial models we put together for this prototype!

Stock (left) and Mishimoto prototype (right) intercooler model

Interested in picking up this exhaust adapter? Check out more details on our product page!

Mishimoto Subaru Exhaust Adapter, 3" Downpipe To Stock Exhaust

Looking for a better way to mate your 3" downpipe to the stock cat-back exhaust? Sick of blowing out gaskets and smearing copper sealant all over your flanges? Mishimoto now offers a 100% stainless steel downpipe adapter flange specifically for mating to a stock exhaust system. If you have a 2002+ WRX or STi, this is the piece for you! Check it out.

The flange adapter itself!

Interested in picking up this awesome catch can system? Check out more details on our product page!

Mishimoto Subaru BRZ / Scion FR-S Baffled Oil Catch Can

Ready for some interesting test results? After around 2,000 miles on a BRZ, this kit was ready to be inspected to see what kind of byproduct had accumulated in each can. The plan was to evaluate both systems to determine whether a single- or dual-can setup was necessary. If one of the lines did not collect any fluid, the need for a catch can would not be justified. So, we popped the hood and inspected the system to see if road abuse had a negative impact on the mounting brackets or lines.

" width="300" height="200">

Interested in purchasing our 2015 WRX top-mount intercooler kit? Check out more details on our product page linked below!

Mishimoto Subaru WRX Performance Top-Mount Intercooler and Charge-Pipe System

Many of you checked out our recent thread about our progress on the 2015 WRX top-mount intercooler. We are finishing some testing to ensure that our product will provide the improvements our customers expect. Our prototypes look awesome, and so far they are proving to be quite efficient. So, we've decided to back-track a bit and highlight the process our team went through to create such an awesome product. We will also be including our final test results, as well as information about how you can get your hands on one of the first units to hit the shelves. Keep an eye on our threads and blog; we have some exciting stuff in the pipeline!

How It All Started

In late March our team ventured

Interested in picking up this awesome catch can system? Check out more details on our product page!

Mishimoto Subaru BRZ / Scion FR-S Baffled Oil Catch Can

Second Prototype Bracket Fabrication

Now that we had our catch can ready to go, it was time to select mounting locations, and fabricate the mounting brackets. First, we will start with the PCV line we initially targeted with the large catch can we had. Check out some initial mock-up shots!

Prototype PCV Catch Can mounted

Interested in picking up this awesome catch can system? Check out more details on our product page!

Mishimoto Subaru BRZ / Scion FR-S Baffled Oil Catch Can

Welcome back to the build of our BRZ/FR-S catch can system! After laying out the guidelines from the last post, we were ready to get some hands on the vehicle and start piecing together some can brackets. Before jumping into product design, we will quickly cover the unique injection system featured on the BRZ/FR-S FA20 engine.

FA20 Fuel Injection

As many of you are aware, the FA20 is not what you could consider a traditional direct-injection engine. This specific system is identified as D-4S on the top of your intake manifold. The system utilizes four direct injectors and four port injectors for appropriate fueling. Yes, your 4-cylinder has eight injectors! The direct injection portion of the system