- Direct fit for the 2015-2017 Subaru WRX
- Provides 35°F temperature drop compared to stock intercooler on a stage 2 tune
- Proven +15 whp and +8 wtq bolt-on power increase on a stage 2 tune
- 100% aluminium construction with durable cast end tanks TIG-welded to a highly efficient bar-and-plate core
- TIG-welded to a highly efficient bar-and-plate core
- Intercooler core designed for maximum cooling efficiency and minimal pressure drop
- Includes larger air duct designed to provide optimal airflow to the Mishimoto intercooler core
- Includes the Mishimoto intercooler charge-pipe for maximum airflow and power capability
- Includes new BPV hoses, hot side coupler, and silicone throttle body hose
- Comes with all necessary hardware, clamps, and brackets for an easy installation
- Pre-marked area for NPT sensor
- Cooler available in durable powder-coated Sleek Silver or Stealth Black finish
- Mishimoto Lifetime Warranty
Mishimoto is expanding their line of 2015 WRX parts! Are you looking for a way to reduce high intake temperatures on your stock or modified 2015 WRX? The solution is the Mishimoto direct-fit 2015 WRX top-mount intercooler kit engineered specifically for the 2015+ Subaru WRX. The stock 2015 WRX intercooler is prone to heat soak during repeated wide open throttle pulls and during track use.
Mishimoto engineers spent months designing the 2015 WRX parts and testing this new 2015 WRX top-mount intercooler to ensure optimum performance on both the street and track. This 2015 WRX intercooler utilizes durable cast aluminium end tanks TIG-welded to a highly efficient, dense bar-and-plate core. The Mishimoto 2015 WRX intercooler has a 4 thick core and a total volume of 625 in3, making it one of the largest top-mount intercoolers you can buy.
Thanks to this volume and a very dense offset fin pitch, we are able to optimize heat transfer and support your 2015 WRX from stock up to 500 whp. This WRX intercooler endured rigorous testing, showing a 35°F temperature drop as well as a +15 whp and +8 wtq bolt-on power increase for our test vehicle equipped with a Mishimoto 2015 WRX downpipe and stage 2 EcuTek tune. Installation is simple, requires no modification to any parts in the engine bay, and can be completed in under 1 hour. Included with this top-mount intercooler is Mishimoto’s innovative 2015 WRX charge-pipe, utilizing a one-piece construction without the need for several couplers and clamps. An application-specific air splitter is included with the top-mount intercooler to help divert the maximum amount of air into your Mishimoto 2015 WRX top-mount intercooler.
The WRX top-mount intercooler kit also includes a new charge-pipe to intercooler hose, an intercooler to throttle body hose, and a new bypass valve hoses. These 2015 WRX parts negate the need to gather supplies for installation, and they ensure years of reliable service. This 2015 WRX intercooler is available in a durable powder-coated finish of Sleek Silver and Stealth Black, with your choice of either a polished, wrinkle black, or wrinkle red pipe, and, like all our 2015 WRX parts, this top-mount intercooler kit includes the Mishimoto Lifetime Warranty.
(1) Bar-and-Plate Intercooler
(1) Intercooler Mounting Bracket
(1) Air Diverter with Attached Rubber Gaskets
(1) Charge-Pipe to Intercooler Hose
(1) Intercooler to Throttle Body Hose
(3) Bypass Valve Hoses
(2) 3 T-bolt Clamp
(2) 3.5 T-bolt Clamp
(4) Worm-Gear Clamps
Mishimoto Lifetime Warranty
This kit is rated for 300–450 whp with maximum limits of approximately 500 whp, or 35 psi of turbo boost. Exceeding that horsepower or pressure limit may require a larger front-mount intercooler. Tuning is not necessary after installing our top-mount intercooler and charge-pipe, but you will see optimal performance if tuning is performed after the intercooler is installed. The top-mount intercooler will not fit with the stock engine cover due to its larger size. Charge Pipe Construction: Aluminum casting with T6063 aluminum tubing
- TECH SPECS
Make Subaru Engine Codes FA20DIT
Chassis Codes VA
Fits 2015+ WRX, 2014+ Forester XT
Installation Torque Specs 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).
22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).
Pipe Diameter ID:
2.19" at the turbo transitioning to 2.60" at the intercooler hose
2.75" at the intercooler hose
Constant Tension T-Bolt Clamps Specs (2) 3" T-bolt Clamp
(2) 3.5" T-bolt Clamp
(4) Worm-Gear Clamps
Core Thickness 4"
Hot-Side Intercooler Pipe Specs I.D. 2.19" at the turbo, transitioning to 2.60" at the intercooler hose
O.D. 2.75” at the intercooler hose
CHARGE-PIPE TO INTERCOOLER HOSE SPECS
Intercooler/Throttle Body Coupler Specs 2.75" I.D.
Weight 24.5 Coating Powder Coated
Tank Wall Thickness 3.5
Fin Pitch Internal: 4.7 fin height, 2.8 fin pitch
External: 4.7 fin height, 1.7 fin pitch
Max Rec. PSI 35 Outlet 3
Core Length 15
Core Height 10
Core Width 4
Core Size 15 x 10 x 4
Overall Width 5 Overall Height 10 Overall Length 24 Construction Bar-and-Plate
Max Rec HP 450
Mishimoto Automotive (“Mishimoto”) warrants their products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorised dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
Be the first to ask a question!