Page 2 - lsx

The second segment of our video review series is up! In this video, we take you on-board our SS for a quick drive and  some basic first impressions. In this video we cover:

-Driving Modes
-Exhaust and Intake Sound
-Wide Open Throttle Pull
-Highway Manners

Check it out!

Our next video will feature some additional driving footage which highlights the handling of the SS.

Thanks for watching!
-John

Interested in picking up our Camaro SS catch can kit? Check out our discounted pre-sale linked below.

Mishimoto 2016+ Camaro SS Catch Can Pre-Sale!

The 2016 Camaro is an impressive feat of modern technology. A 6.2L power plant pushes massive power through a true manual transmission while producing some incredible exhaust tones. GM has really captured the interests of enthusiasts with this new model, and the cues to vintage models are apparent throughout. The 2016 model receives the new LT1 engine, which is a direct-injection V8. In addition, the 2016 has shed a few hundred pounds over the previous model, which was often criticized for its pudginess. We've been filming various video reviews for our 2016 development vehicle, so be sure to check out our thoughts and let us know what you would like to see reviewed next!

Now, on to the project at hand! Our first targeted

We've started our video review series! This first segment provides some insight into our plans for both the video series as well as initial product development. In addition, we cover some standout features on the 2016 and finish it off with a neat exhaust clip.

Check it out!

Thanks for watching!

-John

Our Camaro arrived late on Friday last week. As soon as it rolled off the truck, a swarm of employees surrounded the car, taking turns sitting in the seats, inspecting under the hood, snapping pictures, and wiping slobber from their chins. Alright, maybe not that last one. New development vehicles arrive here pretty frequently, but this one definitely attracted some attention. Being late in the day, we were left with the weekend to ponder and daydream about our turn at taking it for a spin. Before we left for the weekend, our team picked straws to see who would have the privilege of driving it first. One lucky team member took the car home for some break-in driving and splashed some water on the paint to clean it up from a long journey to our facility.

This morning, we slapped on our official "Development" banner and started working out our schedule for development as well as plans for coverage on reviewing this brand new model. Check out a Full gallery of images from the front, back,

Any efficient oil cooler setup needs proper regulation if the vehicle is going to see street use. As many know, cold oil can be just as harmful as oil that is overheated. Allowing engine oil to come up to temperature prior to romping on the throttle is a wise move that will extend the life of your GTO LS. Ideally, you would want the oil at operating temperature as soon as the key is turned. This is typically not possible on a first start, but the quicker it arrives at operating temperature the better. This is why we are including a thermostatic option for this kit, and we highly recommend its use in any street car with this kit installed.

Line Route

We found the best route for our oil lines would be to run them across to the driver side of the front bumper area, winding around the radiator support, and eventually mating with our adapter on the oil filter housing. This route provides an ideal line angle coming into the adapter, as well as a good location for

In our last post, we selected an ideal location to mount our cooler, so now we need to develop and fabricate a set of brackets to rigidly mount our large 25-row heat exchanger. For this task, we have a full fabrication shop and many bright minds at our disposal.

GTO Oil Cooler Mounting Bracket Fabrication

We opted to utilize the upper grille ducts shown in our last post, which should provide ample airflow to the heat exchanger. With more airflow hitting the core, we should see impressive heat transfer.

We began this project by capturing measurements and dimensions from the points where we want to mount within the front grille area. Once complete, we drew up some rough plans for the bracket shape and modeled them in Solidworks. These models were then flattened and printed out in template form.

We reached out to the forums earlier this month with a request for a GTO owner to lend us his vehicle for product development. The response was substantial. Our inbox quickly filled with messages from enthusiasts willing to help out. We got a similar response last year when we developed an aluminum radiator for the goat. Before jumping into this GTO oil cooler product development, we want to extend a huge thank you to the GTO community for supporting us and for offering recommendations on new projects and product design.

The Test Subject

Our test vehicle came all the way from New York, brought to us by a generous fellow named Tom. This model, a 2004, features a bold Yellow Jacket paint scheme along with a manual transmission. Very nice combination!

" width="300" height="163">