Posted:
October 25, 2016
Categories:
Nissan Titan XD Exhaust 2016+
We are back with a much needed update on the Titan XD exhaust. Since our last post covering the stock Titan XD exhaust, we've come up with a design of our own.
The first step in bringing our prototype from design to reality was to create a jig to use for fabrication. We started by taking measurements from the Titan, then fired up the waterjet, and sliced our largest jig to date. It had to be sizeable enough to accommodate the four-inch piping designated for the Titan.
Jig for Titan XD exhaust prototype
" width="426" height="640">
