Get exclusive points discounts ONLY for #TeamMishi Rewards Program account holders. Join to earn reward points on every dollar you spend at mishimoto.com. Click here for our terms and conditions.
Key Features
Features
Direct-fit for 2012-2018 Jeep Wrangler JK
Includes Mishimoto performance aluminum radiator, coolant filter kit, silicone coolant hoses, and low-temp thermostat
Radiator provides 18-percent increase in core volume and 13-percent increase in coolant capacity
Radiator features extruded tubes with internal struts for increased strength and pressure tolerance
Coolant filter helps prevent clogging and extends the life of the radiator, heater core, and other cooling system components
Coolant filter removes particles as small as 27 microns
Coolant hoses are constructed from five layers of silicone with heat-resistant embedded fibers
Thermostat opens at 180F vs. the stock thermostat's 203F opening temp
Whether you're crawling rock faces in Moab or crawling through traffic, you need to make sure your 2012-2018 Jeep Wrangler JK's engine is running clean and cool. The best way to do that is to install the Mishimoto 2012-2018 Wrangler JK Essentials Bundle.This bundle includes everything you need to keep your JK's engine running cool and clog-free. The centerpiece of this bundle is the Mishimoto Performance Aluminum Radiator. This radiator provides your Wrangler's cooling system with an 18-percent increase in core volume and surface area, plus a 13-percent increase in coolant capacity. The increased size translates to more efficient cooling, while the extruded tubes with internal struts mean it can handle anything the trail or highway can throw at it. To make sure your coolant is flowing through the radiator when you want it to and doesn't end up on the ground, this bundle also includes a Mishimoto low-temperature thermostat and a set of Mishimoto silicone radiator hoses. Our thermostat opens at 180F (instead of the factory 203F) to get coolant flowing to the radiator sooner, while the five layers of silicone and heat-resistant fibers in our radiator hoses keep the coolant on the right path. To keep that coolant rushing through your new radiator and hoses clean, this bundle includes our Mishimoto coolant filter kit. The 3.6L Pentastar engine in the 2012-2018 Jeep Wrangler is notorious for clogging heater cores and radiators due to casting sand left in the engine from the factory. To prevent this casting sand from ruining your cooling system, you need to filter it out of the coolant. Our coolant filter kit includes a Wix coolant filter that removes particles as small as 27 microns (about half the width of a human hair). This direct-fit kit mounts in line with your heater core in less than an hour and can help prevent damage from casting sand.
Read more
TECH SPECS
More Information
Note
This coolant filter kit will not repair or reverse damage caused by sediment or other solids in the cooling system. Mishimoto recommends following all manufacturer cooling system service procedures and maintenance intervals.
Mishimoto recommends changing the coolant filter after the first month, again after 3 months, and then every year after that depending on driving conditions. Because each engine was cast differently, there will be a different amount of debris in each engine.
This coolant filter kit will not repair or reverse damage caused by sediment or other solids in the cooling system. Mishimoto recommends following all manufacturer cooling system service procedures and maintenance intervals.
Mishimoto recommends changing the coolant filter after the first month, again after 3 months, and then every year after that depending on driving conditions. Because each engine was cast differently, there will be a different amount of debris in each engine.
Warranty
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
{{/image.url}}
{{^image.url}}
{{/image.url}}