- Direct fit for the 2011+ Ford Ranger 3.2L Diesel
- Mandrel-bent aluminium pipes eliminate restrictive bends
- Shorter hot side for ease of installation
- Cold-side pipe includes bung that can be drilled and tapped for a sensor or boost gauge
- Includes Mishimoto Silicone Boots with DuraCore™ Technology
- Available in polished or micro-wrinkle black powder-coated finish
- Includes constant tension worm gear clamps
- Mishimoto Lifetime Warranty
The 2011+ Ford Ranger 3.2L diesel is one of the most capable small trucks on the planet. With its direct-injected and turbocharged diesel engine producing 470 Nm of torque, the 2019+ Ranger is focused on combining efficiency with capability. The 3.2L Duratorq engine under the bonnet of the Ranger produces plenty of power to let you roam free, but what if you want more? Adding a tune and more boost is a great way to squeeze more power from the Ranger, but the stock rubber intercooler pipes are only made to handle so much boost. That’s why Mishimoto has developed this aluminium intercooler pipe and boot kit for the 2011+ Ford Ranger 3.2L Diesel.
Our all-aluminium intercooler pipes are constructed of mandrel-bent aluminium with a polished or wrinkle black powder-coated finish. These pipes eliminate restrictive bends in the factory pipe, allowing for improvements in airflow and power potential.
This kit includes Mishimoto Silicone Boots with DuraCore technology. Mishimoto DuraCore technology is a synthetic material that comprises the innermost layer of all Mishimoto Silicone Diesel Boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability, this kit includes Mishimoto constant tension worm gear clamps for accurate and consistent holding power.
Like all of our Ranger products, this 2011+ Ford Ranger 3.2L Diesel Intercooler Pipe and Boot Kit is a direct fit and is backed by our Mishimoto Lifetime Warranty.
- TECH SPECS
Engine Codes 3.2L Duratorq Fits 2011+ Ford Ranger XL w/ 3.2L Diesel
2011+ Ford Ranger XLS w/ 3.2L Diesel
2011+ Ford Ranger XLT w/ 3.2L Diesel
2011+ Ford Ranger FX4 w/ 3.2L Diesel
2011+ Ford Ranger Wildtrak w/ 3.2L Diesel
Installation Torque Specs 11 ft-lbs (15N*M) recommended for all constant tension worm gear clamps. These clamps have an operating range of 11-14 ft-lbs (15-20N*M). Do not exceed the maximum torque rating of 14 ft-lbs (20N*M) Pipe Diameter Hot Side: 5.34 cm
Cold Side: 5.9 cm
Pipe Material Aluminium
Mishimoto Automotive (“Mishimoto”) warrants their products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorised dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
- Be the first to ask a question!