Performance Intercooler Kit, fits Ford Focus RS 2015+
Performance Intercooler Kit, fits Ford Focus RS 2015+
- Direct fit for the 2015+ Ford Focus RS
- 80% increase in core size
- 36% increase in internal core volume and 214% increase in external fin surface area
- 46% and 45% less pressure drop than stock cold-side and hot-side pipe, respectively
- 31% and 40% increase in internal volume compared to stock cold-side and hot-side pipe, respectively
- Designed to not block off cooling to the PTU
- 7 whp and 8 wtq bolt-on power increase with stock tune
- Intercooler Available in Sleek Silver or Stealth Black
- Mishimoto Lifetime Warranty
Installation Difficulty: Medium
- Direct fit for the 2015+ Ford Focus RS
- 80% increase in core size
- 36% increase in internal core volume and 214% increase in external fin surface area
- 46% and 45% less pressure drop than stock cold-side and hot-side pipe, respectively
- 31% and 40% increase in internal volume compared to stock cold-side and hot-side pipe, respectively
- Designed to not block off cooling to the PTU
- 7 whp and 8 wtq bolt-on power increase with stock tune
- Intercooler Available in Sleek Silver or Stealth Black
- Mishimoto Lifetime Warranty
Product Description
This kit also includes the Mishimoto performance intercooler piping kit to further improve the flow of charged air through your 2.3L EcoBoost. The piping kit replaces the stock hot-side pipe with our custom design, which not only features a 40% increase in internal volume, but also is specifically shaped to direct airflow over the stock PTU cooler. Our cold-side pipe features 5-layers of wire-reinforced silicone, with a larger diameter to increase the flow of charged air, and extend the life span of your turbocharging system.
The Performance Intercooler Kit is available with either a silver or black core, and with all of our products, is covered under the Mishimoto Lifetime Warranty to keep you pushing the limits in your RS for a lifetime.
TECH SPECS
Applications | 2016-2018 Ford Focus RS |
---|---|
Engine Codes | 2.3L EcoBoost GTDi I4 |
Chassis Codes | C346 |
Maximum Recommended Horsepower | 600 |
Core Type | Bar-and-Plate |
Core Length (in) | 25.6 |
Core Height (in) | 8.3 |
Inlet (in) | 2.75 |
Outlet (in) | 2.75 |
Installation Notes | 27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM). |
Compatible Vehicles
Installation Guides
Downloads
Purchase Includes
(1) Left & Right Diversion Plate
(1) Hot-side Intercooler Pipe
(2) Silicone Couplers
(1) Wire-reinforced Silicone Hose
(4) T-bolt clamps
(2) High-Torque Worm Gear Clamps
Mounting Hardware
Mishimoto Lifetime Warranty
Warranty
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.


Frequently Asked Questions




