Back to top
£152.70 (Incl. VAT)
  • Direct fit for the 2015+ Ford Focus RS
  • Silicone construction absorbs the stresses of excessive engine movement
  • Improves heat and pressure tolerance
  • 46% less pressure drop than stock cold-side pipe
  • Additional features below
Features

PRODUCT FEATURES

  • Direct fit for the 2015+ Ford Focus RS
  • Silicone construction absorbs the stresses of excessive engine movement
  • Improves heat and pressure tolerance
  • 46% less pressure drop than stock cold-side pipe
  • 31% increase in internal volume compared to stock cold-side pipe
  • Fits both stock and Mishimoto Focus RS intercooler
  • Mishimoto Lifetime Warranty

DESCRIPTION

Feed more air into the 2.3L EcoBoost engine of your 2016–2018 Ford Focus RS with Mishimoto’s newly released cold-side intercooler pipe. This design increases the internal volume by 31% over its stock counterpart and has a 46% pressure drop improvement. The design is flexible enough to make install a breeze, yet durable enough to withstand just as much increased boost pressure abuse as an aluminium counterpart. It is made of five-ply silicone and reinforced with steel wire to prevent any misshaping under vacuum. It is also one solid piece through and through, eliminating the need for couplers. Nobody likes failing couplers that cause boost leaks, anyway.This hose is available in black, comes with stainless steel T-bolt clamps, and installs in under 30 minutes. Of course, it is also backed by our coveted Mishimoto Lifetime Warranty.

PURCHASE INCLUDES

(1) Wire-reinforced Silicone Hose
(1) T-Bolt Clamp
(1) High Torque Worm Gear Clamp
Mishimoto Lifetime Warranty

TECH SPECS

VEHICLE SPECS

MakeFord
Engine Codes 2.3L EcoBoost GTDi I4
Chassis Codes MKIII
Fits 2015+ Ford Focus RS

PRODUCT SPECS

Installation Torque Specs 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).
Constant Tension T-Bolt Clamps Specs (1) 76.2mm T-Bolt Clamps
Outlet 2.5"
Inlet 2.75"
Overall Length17.416"
ENGINEERING

Mission In-Pipe-Sible – Intercooler Piping R&D, Part 3: The Hot Side

December 01, 2021

I’ve said it before and I’ll say it again: paying attention to details is a crucial part of life. Leading professionals are gurus at doing so in their respective fields. A good chef can wade through the already heavy seasoning in something like a gumbo and tell if there is too much or too little … Continue reading Mission In-Pipe-Sible – Intercooler Piping R&D, Part 3: The Hot Side →

Read More 

Mission In-Pipe-Sible – Intercooler Piping R&D, Part 3: The Hot Side

Mission In-Pipe-Sible – Intercooler Piping R&D, Part 2: The Cold Side

December 01, 2021

Our intercooler pipes are on the tail end of our journey to extract some elevated performance out of our 2016 Ford Focus RS. Along with our intercooler project making great strides in development, we have some updates to share with you regarding our intercooler piping. In usual fashion, we plan to make each pipe individually available, … Continue reading Mission In-Pipe-Sible – Intercooler Piping R&D, Part 2: The Cold Side →

Read More 

Mission In-Pipe-Sible – Intercooler Piping R&D, Part 2: The Cold Side

Mission In-pipe-sible – Intercooler Piping R&D, Part 1: Stock Review

December 01, 2021

This hot hatch is heating up our headquarters! We have several projects in the works, so if you have not had a chance to check them out, you can do so on the Focus RS section of our engineering blog. Stock Focus RS intercooler piping Often, one of the first modifications to turbocharged vehicles is … Continue reading Mission In-pipe-sible – Intercooler Piping R&D, Part 1: Stock Review →

Read More 

Mission In-pipe-sible – Intercooler Piping R&D, Part 1: Stock Review
blogload
WARRANTY

Mishimoto Automotive (“Mishimoto”) warrants their products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorised dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.

For our complete warranty policy, please click here.

Mishimoto Lifetime Warranty on ALL Products
FAQ
Be the first to ask a question!

SHOW US YOUR #Mishimoto Build

PUSH THE LIMITS WITH MISHIMOTO
Push the limits with Mishimoto
Sponsorship Mishimoto
Cyber Monday Deals are Extended
Heat Protection Shield Wrap Tape