- Direct fit for 2008–2010 Ford 6.4L Powerstroke
- Upper support bar provides improved rigidity to minimize front end flex
- Aluminum radiator incorporates internally strutted tubes in the top and bottom 8 rows for increased strength against high pressure and temperature
- Coolant hoses are constructed from five layers of heat-resistant fibers and silicone and come pre-assembled with CNC-machined couplers
- High temp and Low-temp thermostats allow you to tailor the cooling system for cold or hot environments
- 1.1 bar (16 psi) overflow reservoir cap raises the boiling point of engine coolant to provide a safer and more efficient cooling system
- All components are back by Mishimoto's Lifetime Warranty
If you're looking to revamp the cooling system on your 2008–2010 Ford 6.4L Powerstroke, and then some, look no further. The Mishimoto 6.4L Powerstroke Heavy-duty Protection Bundle includes everything you need to make sure your cooling system is as tough as the rest of your Ford.
In addition to our fully-aluminum performance radiator and sturdy steel upper support bar, this bundle includes our high-temp thermostat, low-temp thermostat, reservoir tank cap, and silicone coolant hoses. Everything in this bundle is engineered and tested to be direct fit with your 6.4L Powerstroke, while providing greater durability and performance.
Say goodbye to leaking stock radiators and hoses, faulty thermostats and rad caps, and weak upper support bars - with this bundle, you'll never have to worry about another drop of coolant on your driveway or shop floor.
As with all of our products, these components are back by our Mishimoto Lifetime Warranty, for performance backed by peace of mind.
Magnetic Drain Plug w/ Dowty Oil Seal
(2) Rubber Mounting Pegs
(8) M6 x 1.0 x 14mm Bolts
Upper Support Bar:
(1) - Mishimoto Support Bar
(2) - Mounting Brackets
(2) - Rubber Hood Stops
(1) - Hardware Pack
(2) Mishimoto High-temp Thermostats
(2) Mishimoto Low-temp Thermostats
(2) Factory-Style O-Rings
(3) Silicone Hoses
(4) CNC Aluminum Couplers(pre-attached)
(4) Stainless Steel Spring Clips(pre-attached)
(1) Aluminum Tube Joiner(pre-attached)
(5) 50-70mm Worm-Gear Clamps(pre-attached)
(1) 50-70mm Worm-Gear Clamp
(8) Rubber O-Rings(pre-installed)
(1) Mishimoto Overflow Reservoir Cap
Mishimoto Lifetime Warranty
For written installation instructions, please see the "Tech Info" section of the individual product pages
- TECH SPECS
Fits 2008-2010 Ford F-250 w/ 6.4L Powerstroke
2008-2010 Ford F-350 w/ 6.4L Powerstroke
2008-2010 Ford F-450 w/ 6.4L Powerstroke
2008-2010 Ford F-550 w/ 6.4L Powerstroke
Material Aluminum Patent number U.S. Patent Number: D717,702 S Drain Plug Thread Size (M12) x 1.5 Tank Wall Thickness 0.098" Outlet Quick Disconnect Rows 2 Inlet Quick Disconnect Coolant Capacity 8.36 Dual Pass False Core Thickness 2.76"
Mishimoto Automotive (“Mishimoto”) warrants their products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorised dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
- Be the first to ask a question!