£79.00 (Incl. VAT)
  • Direct fit for the 2013–2015 Ford Fiesta ST 180
  • Up to 5 whp / 10 wtq gains over the stock rubber induction hose
  • Installs in 30 min
  • Fits with the stock air intake system
  • Additional features below
Features

PRODUCT FEATURES

  • Direct fit for the 2013–2015 Ford Fiesta ST 180
  • Up to 5 whp / 10 wtq gains over the stock rubber induction hose
  • Installs in 30 min
  • Fits with the stock air intake system
  • 28% increase in internal volume allows for more airflow
  • No additional tuning necessary
  • Silicone construction for added durability and long service life
  • Silicone hose reinforced with steel rings to prevent collapse
  • Pre-installed CNC connector provides a quick and easy installation
  • Available in black, blue, or red
  • Mishimoto Lifetime Warranty

DESCRIPTION

The Mishimoto 2014+ Ford Fiesta ST Silicone Induction Hose is precision engineered as a bolt-on upgrade in both performance and style. The 100% silicone hose is crafted with four-layers of silicone and heat-resistant embedded fibres for added strength. This 2014+ Fiesta ST kit replaces the small rubber induction hose with the superior silicone induction hose, which can tolerate much higher temperatures and internal vacuum. The CNC port is also permanently attached to the hose with a non-removable clamp, and comes with two silicone-safe worm-gear clamps, making installation easy!

Mishimoto's 2014+ Fiesta ST silicone induction hose is more durable and will outlast the stock components substantially. To promote improved airflow, this hose has been designed with a smooth internal surface, unlike the accordion-style bends in stock hoses. Whether you are entering your 2014+ Fiesta ST in the local autocross, or lapping at your next track day, trust Mishimoto and our line of parts to keep your Fiesta ST cool. The Mishimoto 2014+ Fiesta ST Silicone Induction Hose Kit is available in black, blue, or red to match your styling preference. This kit, like our entire line of 2014+ Fiesta ST performance parts, includes the signature Mishimoto Lifetime Warranty.

PURCHASE INCLUDES

(1) Silicone Induction Hose w/ pre-assembled CNC port
(1) 70-90mm Worm-Gear Clamp
(1) 60-80mm Worm-Gear Clamp
Mishimoto Lifetime Warranty

NOTES

NOTE This induction hose only fits with the stock air intake system. This will not fit with any aftermarket air intake. INSTALLATION TORQUE SPECS 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).

TECH SPECS

VEHICLE SPECS

Engine Codes 1.6L Ecoboost
Chassis Codes B3

PRODUCT SPECS

Material Silicone
Exterior Material Silicone
Interior Material Heat-Resistant Embedded Fibers
Outer Diameter 76.2
Max Temp 330°F
Inner Diameter 71.1
ENGINEERING

Improve Airflow – Silicone Induction Hose R&D, Part 3: Test Results

September 30, 2015

After installing the Fiesta ST induction hose, it was time for the moment of truth! The Fiesta is once again up against the dyno to see what this induction hose brings to the table. Installing the Fiesta induction hose on the ST Fiesta ST on the dyno for Fiesta induction hose testing Initially we were … Continue reading Improve Airflow – Silicone Induction Hose R&D, Part 3: Test Results →

Read More 

Improve Airflow – Silicone Induction Hose R&D, Part 3: Test Results

Improve Airflow – Silicone Induction Hose R&D, Part 2: Final Prototype

September 28, 2015

We received our final silicone prototype for testing and got straight to installing it on our Fiesta ST. This install is a breeze! After removing two quick clamps and a barb fitting, the stock hose was out and the Mishimoto hose was installed and looking good. Take a look at our black hose option installed … Continue reading Improve Airflow – Silicone Induction Hose R&D, Part 2: Final Prototype →

Read More 

Improve Airflow – Silicone Induction Hose R&D, Part 2: Final Prototype

Improve Airflow – Silicone Induction Hose R&D, Part 1: Stock Evaluation

September 24, 2015

You may have seen our R&D post on the full Fiesta ST intake, but this one is a little different. We are developing a silicone induction hose as solution for drivers of mainly stock Fiestas who don’t want to replace their entire intake system. The stock rubber hose can be restrictive due to its shape … Continue reading Improve Airflow – Silicone Induction Hose R&D, Part 1: Stock Evaluation →

Read More 

Improve Airflow – Silicone Induction Hose R&D, Part 1: Stock Evaluation
blogload
WARRANTY

Mishimoto Automotive (“Mishimoto”) warrants their products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorised dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.

For our complete warranty policy, please click here.

Mishimoto Lifetime Warranty on ALL Products
FAQ
Be the first to ask a question!

SHOW US YOUR #Mishimoto Build