Cooler Construction Stacked-plate
This oil cooler kit does not fit NISMO models.
Install Torque Specs
15-25 ft/lbs (operating range) for all straight fittings and banjo bolts. Do not exceed the maximum torque rating of 35 ft/lbs.
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact firstname.lastname@example.org.
Increase In Oil Capacity
0.65 Quarts (0.613L)
Overall Height 328.93 mm
Overall Length 163.57 mm
Overall Width 50.03 mm
279.4 mm x 137.9 mm
(1) Application-Specific Mounting Bracket
(1) 19 Row Oil Cooler
(1) 4ft Stainless Steel Braided Hose w/ -10AN Fittings
(1) 5ft Stainless Steel Braided Hose w/ -10AN Fittings
(1) Oil Sandwich Plate M20 (Thermostatic Plate as Option in Drop Down)
(1) Stainless Steel Sandwich Plate Adapter, M20
(2) Banjo Fitting w/ Bolt M20 x -10AN, Black
(1) Mounting Hardware Set
2003-2009 Nissan 350Z
2003-2007 Infiniti G35 (Coupe only)