Back to top
£47.89 (Incl. VAT)
  • 44.45mm outer diameter, 180° bend
  • Durable 304 stainless steel construction
  • Perfect for use on exhaust components, downpipes, and external wastegate dumps
  • Available in 90°, 180°, U-J bends, or straight sections
  • Additional features below



Mishimoto has your next project covered with our line of Universal Stainless Steel Piping. Our line of piping is available in a natural finish and is perfect for use on exhaust systems, downpipes, or external wastegate dumps. The Mishimoto Universal Stainless Steel Piping line has all the sizes and shapes to fit your build with outer diameters ranging from 38–76.2 mm, and you have a choice between straight, 90°, 180°, and U-J bend sections. The Mishimoto Universal Stainless Steel Piping, like all our products, also includes the Mishimoto Lifetime Warranty for a worry-free addition to your custom build.



Pipe Bend180°
Pipe MaterialStainless Steel
Universal Pipe Diameter (in) 1.75
Universal Pipe Diameter (mm) 44.45
Overall Pipe Length (in) 11.81
Pipe Leg Length (in) 8.2
Pipe CLR (in) 2.8

Mishimoto Automotive (“Mishimoto”) warrants their products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorised dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.

For our complete warranty policy, please click here.

Mishimoto Lifetime Warranty on ALL Products

Q. When Should I use Aluminum or Stainless Steel piping?

A. The use case for these two materials depends on your project. Our Stainless Steel piping is specifically intended for use on exhaust components, like in your exhaust system or custom downpipes, since it can stand up to the heat, but is able to be used anywhere you see fit. Our universal aluminum tubing selections are mainly for use on intake and intercooler systems, and would not be recommended to be used in high heat applications.

Q. What size should I use?

A. This depends on the application that the piping will be used. We offer a wide range of sizes to accommodate most builds. The size of your universal piping can have an effect on the performance of your build so consult your tuner or speed shop if you’re unsure on the correct piping diameter for your application.

Q. What is the best method for completing my universal piping system?

A. All of our pipes arrive ready for fabrication for those with the ability or access to fabrication tools. We recommend that the stainless steel tubing be welded or use the correct flanges and clamps applicable to your build. In terms of the aluminum piping, we offer an extensive line of silicone couplers and clamps for the completion of your intercooler or intake project. If going the route of couplers over welding, we would recommend adding bead rolls to the piping for a more secure seal on the system.

Be the first to ask a question!

SHOW US YOUR #Mishimoto Build

Push the limits with Mishimoto
Sponsorship Mishimoto
Weighted Knobs
Heat Protection Shield Wrap Tape