- Direct fit for the 2015-2017 Ford Mustang GT
- Innovative bar-and-plate oil cooler mounts in the upper grille, allowing more room for supercharger heat exchangers
- Mounting bracket also serves as an air diversion panel, directing the maximum amount of ambient air through the oil cooler
- Pre-made stainless steel braided oil lines with durable -AN fittings
- Comes with replacement lower radiator hose to bypass the stock fluid-based oil cooler
- Removes the stock fluid-based oil cooler for less stress on the engine's cooling system
- Billet aluminum thermostatic oil sandwich plate
- Increases oil capacity by 1qt
- Fits with most aftermarket supercharger kits
- Will require aftermarket adapter plate for proper installation
- Mishimoto Lifetime Warranty
Nobody likes being sidelined at the track due to high engine oil temperatures. Mishimoto is here to help with a new line of efficient Mustang GT parts. Forced induction setups and some track miles can significantly overheat your oil and wear out your engine, so our engineers have developed an oil cooling solution for your Mustang GT! The Mishimoto engineers designed the heat exchanger for this project from scratch to create the largest oil cooler that we offer, and mounted it in the front of the vehicle where it receives the most airflow. Application-specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. This 2015 Mustang GT oil cooler kit is available with either a Sleek Silver or Stealth Black cooler and the Mishimoto Thermostatic Oil Sandwich Plate. As with all our 2015 Mustang parts, the Mishimoto Mustang GT Oil Cooler Kit includes the Mishimoto Lifetime Warranty.
(1) Application Specific Mounting Bracket / Air Diversion Shield
(1) Bar and Plate Oil Cooler (Silver or Black)
(1) 2ft 5in Stainless Steel Braided Hose w/ -10AN Fittings
(1) 4ft 11in Stainless Steel Braided Hose w/ -10AN Fittings
(1) M22 Thermostatic Sandwich Plate
(1) Application - Specific, M22 x 1.5 extended length center bolt
(2) M20 x -10AN Straight Fittings
(2) 1/8" NPT Plugs
(1) Large O-ring
(1) Lower Radiator Hose w/ worm gear clamps
(1) Mounting Hardware Set
Mishimoto Lifetime Warranty
Right-Hand Drive models will require an adapter plate in order to remove the factory oil cooler for proper installation of this kit. Please contact your local performance shop or distributor to source the correct oil cooler adapter plate.
- TECH SPECS
Engine Codes 5.0 Coyote
Chasis Codes S-550
Rows 12 Cooler Construction Bar-and-Plate Core Length 470MM
Fitting Size -10AN
Caution Requires the removal of the stock coolant based oil cooler
Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs
Increase In Oil Capacity 1
Overall Length 805MM Overall Width 267MM Inlet -10AN
Also Fits 2015+ Ford Mustang GT
Braided Hoses Yes
Mishimoto Automotive (“Mishimoto”) warrants their products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorised dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
Be the first to ask a question!