Add your photo

Intercooler Pipe and Boot Kit, fits Chevrolet/GMC 6.6L Duramax (L5P) 2017-2019 PRE-SALE

Model
MMICP-DMAX-17K
As low as £669.61 (Incl. VAT)
Only %1 left
Add to Wish List
$Login or create an account to earn 558 pts for this product.
Key Features
Features
  • Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
  • 3.0-in mandrel-bent aluminum polished pipes eliminate restrictive bends
  • Also available in custom colors
  • Up to 55-percent less restrictive than stock piping
  • Includes new quick-disconnect O-ring and spring clip
  • Hot-side eliminates stock resonator for maximum flow
  • Eliminates failure-prone stock throttle valve connector
  • Retains temp sensor harness mount for safe and secure wire routing
  • Internal bead roll ensures secure connection between coupler and throttle valve
  • CNC-machined quick-disconnect ensures precise, leak-free fit
  • Additional bungs can be drilled and tapped for sensors
  • Requires no additional tuning
  • Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
  • Available in polished or wrinkle-black powder coated finish
  • Note: Coupons and discounts do not apply to items in pre-sale

Installation Difficulty: Medium

Key Features
  • Direct fit for 2017-2019 Chevrolet/GMC 6.6L Duramax L5P
  • 3.0-in mandrel-bent aluminum polished pipes eliminate restrictive bends
  • Also available in custom colors
  • Up to 55-percent less restrictive than stock piping
  • Includes new quick-disconnect O-ring and spring clip
  • Hot-side eliminates stock resonator for maximum flow
  • Eliminates failure-prone stock throttle valve connector
  • Retains temp sensor harness mount for safe and secure wire routing
  • Internal bead roll ensures secure connection between coupler and throttle valve
  • CNC-machined quick-disconnect ensures precise, leak-free fit
  • Additional bungs can be drilled and tapped for sensors
  • Requires no additional tuning
  • Includes Mishimoto silicone boots with DuraCore technology and Mishimoto constant-tension T-bolt clamps
  • Available in polished or wrinkle-black powder coated finish
  • Note: Coupons and discounts do not apply to items in pre-sale

Product Description

Improve the power and efficiency of your 2017-2019 Chevrolet/GMC 6.6L Duramax L5P with our Mishimoto intercooler pipe and boot kit. The factory L5P intercooler pipes are a measly 2.5" diameter that chokes the engine, while tight bends and a resonator on the hot side create even more restriction.

The Mishimoto intercooler pipes are 3" in diameter throughout with smooth transitions to significantly increase airflow, resulting in more power potential. Our hot-side pipe also eliminates the stock resonator for maximum flow. Combined, the Mishimoto intercooler pipes are up to 55% less restrictive than stock.

Both the hot-side and cold-side utilize a two-piece design for ease of install. To connect the pipes to our Duramax, this kit also includes our silicone boots with DuraCore™ technology. Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts.

To add even more reliability, this kit includes Mishimoto constant-tension T-bolt clamps for accurate and consistent holding power. Our cold-side intercooler pipes also feature a CNC-machined quick-disconnect fitting with new O-ring and spring clip to ensure a secure and leak-free fit. Unlike other available pipes on the market, our pipes retain the intake air temp harness mounting location for safe and secure wire routing, just as Chevy/GMC intended. Our intercooler pipes also incorporate two bungs that can be drilled and tapped for sensors, so you can easily monitor your L5P's performance.

The Mishimoto 2017-2019 Chevrolet/GMC 6.6L Duramax L5P intercooler pipe and boot kit is a direct bolt-on upgrade and is available in a polished or wrinkle black powder coated finish. Like all our Duramax products, this kit includes our Mishimoto Lifetime Warranty.
Read more

TECH SPECS

More Information
Applications2017-2019 Chevrolet Silverado 2500 HD w/ 6.6L Duramax L5P
2017-2019 Chevrolet Silverado 3500 HD w/ 6.6L Duramax L5P

2017-2019 GMC Sierra 2500 HD w/ 6.6L Duramax L5P
2017-2019 GMC Sierra 3500 HD w/ 6.6L Duramax L5P
Core Length (in)22
Core Height (in)6
Installation Notes27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM).

Downloads

Downloads
Installation Guides
pdf
(Size: 4.5 MB)
Installation Guides

Purchase Includes

(3) Aluminum Intercooler Pipes
(1) Aluminum Intercooler Pipe w/ O-Ring and Spring Clip
(5) Silicone Boots with DuraCore Technology
(10) Constant-Tension T-Bolt Clamps
Mishimoto Lifetime Warranty

Frequently Asked Questions

Only registered users can ask questions. Please Sign in or create an account
CUSTOMERS ALSO PURCHASED