Life time warranty seal
Add your photo

Intercooler Pipe Kit fits Chevrolet Camaro 2.0T 2016+/Cadillac ATS 2013+

Model
MMICP-CAM4-16K
As low as £691.66 (Incl. VAT)
Only %1 left
Add to Wish List
$Login or create an account to earn 576 pts for this product.
Key Features
Features
  • Direct fit for the 2016+ Chevrolet Camaro 2.0T/2013+ Cadillac ATS 2.0T
  • Dyno-proven maximum gains up to 11 whp and 9 wtq on a stock tune
  • 30% greater internal volume than stock
  • 10% increase in flow
  • Aluminum intercooler pipes replace weak stock plastic and rubber pipes
  • Utilizes stock quick-disconnect fittings for easy installation
  • Mandrel-bent aluminum piping
  • CNC-machined port for stock sensor connection
  • Pre-welded NPT port on cold-side pipe allows for quick install of aftermarket meth injection or boost gauge
  • Available in polished and wrinkle black
  • Includes Mishimoto silicone coupler and Mishimoto T-bolt clamps
  • Available in polished and wrinkle black
  • Mishimoto Lifetime Warranty

Installation Difficulty: Medium

Key Features
  • Direct fit for the 2016+ Chevrolet Camaro 2.0T/2013+ Cadillac ATS 2.0T
  • Dyno-proven maximum gains up to 11 whp and 9 wtq on a stock tune
  • 30% greater internal volume than stock
  • 10% increase in flow
  • Aluminum intercooler pipes replace weak stock plastic and rubber pipes
  • Utilizes stock quick-disconnect fittings for easy installation
  • Mandrel-bent aluminum piping
  • CNC-machined port for stock sensor connection
  • Pre-welded NPT port on cold-side pipe allows for quick install of aftermarket meth injection or boost gauge
  • Available in polished and wrinkle black
  • Includes Mishimoto silicone coupler and Mishimoto T-bolt clamps
  • Available in polished and wrinkle black
  • Mishimoto Lifetime Warranty

Product Description

Expose your 2.0T LTG engine to improved airflow with the Mishimoto Performance Intercooler Pipe Kit for the 2016+ Chevrolet Camaro. The stock intercooler pipes are plagued by bends and a restrictive diameter. Both slow the airflow to your intercooler. The stock piping is also constructed of plastic and rubber, which will deteriorate over time on top of restricting air to your engine. This Mishimoto intercooler pipe kit is constructed of mandrel-bent aluminum and features a larger diameter to minimize any airflow restrictions. These pipes can handle the power you throw at them when turning up the boost on your LTG.

Plastic is a material that Mishimoto always strives to replace with our products, and the stock cold-side intercooler pipe needed some work. Half of the stock cold-side pipe is constructed of plastic, which is prone to cracks and leaks. The Mishimoto cold-side pipe is a single section of mandrel-bent, aluminum piping featuring a CNC-machined sensor flange for use of the stock pressure sensor, a port for methanol injection, or a port for a boost gauge sensor. The hot-side pipe includes more precise machining with a perfect match of the turbo manifold flange designed for a painless installation. The hot-side pipe also has a bigger diameter for better airflow and an increase in overall volume.

Mishimoto's 2016+ Camaro 2.0T performance intercooler pipe kit includes durable silicone couplers and stainless steel T-bolt clamps to ensure leak free connections between the hot-side sections and to the intercooler. Installation can be completed without modification to the engine bay as it is compatible with the stock intercooler. The Mishimoto performance intercooler pipe kit is available in either wrinkle black or a polished finish, and like all our Camaro 2.0T performance parts, includes the Mishimoto Lifetime Warranty.
Read more

TECH SPECS

More Information
Applications2016+ Chevrolet Camaro 2.0T
2013-2019 Cadillac ATS 2.0T
Engine CodesLTG
Chassis CodesAlpha
NoteThere is an O-ring inside of the stock intercooler pipe on the end that connects to the intercooler. This O-ring must be removed and installed into your Mishimoto intercooler pipe. Take note when removing it from the stock pipe as the O-ring must be installed in the correct direction. Please reference our installation video for additional information.
Installation Notes27 in-lbs (3NM) recommended for all T-bolt and constant-tension T-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4NM). Do not exceed the maximum torque rating of 35 in-lbs (4NM).

Downloads

Downloads
Engineering Report
pdf
(Size: 1.7 MB)
Engineering Report
Installation Guides
pdf
(Size: 1.4 MB)
Installation Guides

Purchase Includes

(2) Aluminum Pipes w/ CNC-machined quick-disconnects
(1) Aluminum Pipe w/ CNC-machined 2-bolt flange
(2) Quick-Disconnect Spring Clips
(1) 2.75-in 90-degree Silicone Coupler
(1) 2.25-in to 2.5-in Silicone Transition Coupler
(1) 2.5-in T-bolt Clamp
(1) 2.75-in T-bolt Clamp
(2) 3-in T-bolt Clamps
Mishimoto Lifetime Warranty

Note:

There is an O-ring inside of the stock intercooler pipe on the end that connects to the intercooler. This O-ring must be removed and installed into your Mishimoto intercooler pipe. Take note when removing it from the stock pipe as the O-ring must be installed in the correct direction. Please reference our installation video for additional information.

ENGINEERING

Warranty

Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.

For our complete warranty policy, please click here.

Frequently Asked Questions

Only registered users can ask questions. Please Sign in or create an account
CUSTOMERS ALSO PURCHASED