Back to top
Not Available
  • Direct fit for the 2013+ Cadillac ATS 2.0T
  • Dual can setup mounts in line with the PCV and CCV systems to separate oil from air using a 50-micron bronze filter
  • Helps reduce carbon buildup on intake valves
  • Patent pending Billet 6061 aluminium can sealed with Viton™ O-rings
  • Additional features below
Features

PRODUCT FEATURES

  • Direct fit for the 2013+ Cadillac ATS 2.0T
  • Dual can setup mounts in line with the PCV and CCV systems to separate oil from air using a 50-micron bronze filter
  • Helps reduce carbon buildup on intake valves
  • Patent pending Billet 6061 aluminium can sealed with Viton™ O-rings
  • Installs in under 30 minutes
  • Robust, application-specific brackets mount cans in serviceable locations
  • Includes our Patent Pending PCV adapter to allow for proper connection into engine's PCV system
  • Includes pre-molded hoses with factory quick-disconnect fittings for simplified installation
  • Defends intake system and essential engine components from oil blow-by
  • CNC-machined aluminium barbed fittings ensure a sturdy connection between lines and can
  • Catch cans have an 88ml capacity for longer servicing intervals
  • Internal air diverter increases air turbulence to improve oil separation
  • Helps maintain proper octane levels to reduce potential detonation
  • Filter and can are fully serviceable
  • Mishimoto Lifetime Warranty

DESCRIPTION

This is the most efficient method for protecting your LTG engine from the dangers of oil blow-by. Why buy one, and then the other? Get both the PCV and CCV Baffled Oil Catch Can Kits combined in one. With this complete Mishimoto 2013+ Cadillac ATS 2.0T Catch Can System, you will have an unbeatable setup that effectively combats oil blow-by, keeping your intake, charge pipes, and turbocharger compressor free of oil. To help maintain proper octane levels, prevent blow-by, and reduce potential detonation, we use a patent-pending solution engineered to extract blow-by through utilizing a hidden PCV valve inside the valve cover.

This complete kit uses two catch cans from the PCV and CCV system that are equipped with 50-micron bronze filters, with application-specific mounts and silicone hoses available in blue, black, or red. Your dual billet 6061 aluminum catch cans will mount securely under your hood as if they came that way from the factory, and they both install in under an hour! The Mishimoto 2013+ Cadillac 2.0T Catch Can System includes all mounting and installation hardware, and ships with the Mishimoto Lifetime Warranty.

Our catch cans are different from most air-oil-separator (AOS) systems on a few levels. First, our catch cans are not heated. This means that all of the blow-by is able to condense in the can, including low-octane oil vapors and contaminated fuel vapors. Most AOS systems also drain the blow-by back into the oil pan, while our catch cans trap the blow-by and keep it out of the engine permanently. If you’ve seen what we’ve seen in the bottom of our catch cans, you won’t want that draining back into your oil either.

PURCHASE INCLUDES

(2) Compact Baffled Oil Catch Cans
(2) Application-Specific Brackets
(5) Direct-Fit Hoses with Pre-Installed Quick-Disconnect Fittings
(2) 1/2" Aluminum Barbed Fittings
(2) 3/8" Aluminum Barbed Fittings
(1) Patent Pending PCV Adapter (supplied with 2 extra O-rings)
(1) Plastic Barbed Straight Fitting
(11) Worm Gear Hose Clamps
Mounting Hardware
Mishimoto Lifetime Warranty

NOTES

After installation, Mishimoto recommends checking the contents of the baffled catch can every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.

TECH SPECS

VEHICLE SPECS

Engine Codes LTG
Chassis Codes Alpha
Fits 2013+ Cadillac ATS 2.0T

PRODUCT SPECS

Overall Height96.5 mm
Inlet 3/8" PCV
1/2" CCV
Outlet 3/8" PCV
1/2" CCV
Drain Plug Thread Size 3/8" NPT
Capacity 88 ml
Material 6061 Aluminum
Install Torque Specs 22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).
BaffledTrue
ENGINEERING

We Get Around – Catch Can R&D, Part 6: Cadillac Field Trip

August 18, 2022

Though the winter continues to perpetuate chilly weather and monotonous gloom here on the east coast, the future is looking bright for our Mishimoto 2013+ Cadillac ATS catch can kit. After a nice visit to the local Porsche dealership (yes, you read that correctly), armed with some anomalous 50◦ January sunshine, several delicious sandwiches, and … Continue reading We Get Around – Catch Can R&D, Part 6: Cadillac Field Trip →

Read More 

We Get Around – Catch Can R&D, Part 6: Cadillac Field Trip

Catch A Wave (of Blow-By) – Part 5: Wait, How Many Cans?

August 18, 2022

Happy 2017, people! I hope you all had wonderful experiences throughout the holiday season and you welcomed in the New Year with a glass of something delicious. I know I did! Whatever you had, I’m sure you enjoyed it much more than your Camaro 2.0T enjoys drinking blow-by. So to begin the year on the … Continue reading Catch A Wave (of Blow-By) – Part 5: Wait, How Many Cans? →

Read More 

Catch A Wave (of Blow-By) – Part 5: Wait, How Many Cans?

Little Caddy – Catch Can R&D, Part 4: ATS Hose Routing

August 18, 2022

Hello to all my wonderful Camaro 2.0T and Cadillac ATS owners! In our last update, we made the big reveal of our patent-pending blow-by tap. We drilled down into the details of how we plan on mining that nasty vein of oil vapor out of your LTG and transporting it to a catch can, instead … Continue reading Little Caddy – Catch Can R&D, Part 4: ATS Hose Routing →

Read More 

Little Caddy – Catch Can R&D, Part 4: ATS Hose Routing
blogload
WARRANTY

Mishimoto Automotive (“Mishimoto”) warrants their products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorised dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.

For our complete warranty policy, please click here.

Mishimoto Lifetime Warranty on ALL Products
FAQ
Be the first to ask a question!

SHOW US YOUR #Mishimoto Build

PUSH THE LIMITS WITH MISHIMOTO
Push the limits with Mishimoto
Sponsorship Mishimoto
Weighted Knobs
Heat Protection Shield Wrap Tape