Get exclusive points discounts ONLY for #TeamMishi Rewards Program account holders. Join to earn reward points on every dollar you spend at mishimoto.com. Click here for our terms and conditions.
Key Features
Features
Direct fit for the 2015-2020 BMW F8X M3, M4, and M2 Competition
Add some much-needed durability and cooling power to your M3 or M4 with the Mishimoto 2015-2020 BMW M3/M4 Oil Cooler kit. True to form, the BMW engineers designed the M3/M4's oil cooler with efficient space use in mind. Suspended perpendicular from the rest of the cooling stack, this location utilizes the Bimmer's aerodynamics in order to cool the oil, all while putting the lightweight, tube-and-fin cooler in harm's way of road hazards.
We here at Mishimoto made sure to beef up the entire oil cooling system design for the F80/82 with our performance oil cooler. We ditched the lightweight design for a full aluminium, TIG-welded bar-and-plate cooler for added strength and cooling. The bars and plates are a much more robust form of heat exchanger core construction intended for improved heat transfer and have the strength to shrug off potential road debris, keeping your oil temps down and where it should be. We also added 10mm to the core's thickness, equating in a 46% increase in core volume, and increased the oil capacity by .42 liters.
In addition we wanted to add an extra degree of protection to the system by improving on the lines. From the factory, these vehicles are equipped with unforgiving hardlines that are prone to abrasion and corrosion damage. Our oil cooler kit provides a pair of application-specific, flexible, and robust nylon braided lines for a more secure channel for your M's oil. Also included are our specially designed adaptors allowing for AN fittings from the S55's oil pump and a secure connection to the oil cooler.
The Mishimoto 2015-2020 BMW M3/M4 Oil Cooler Kit fits directly in place of the stock unit, and includes the Mishimoto Lifetime Warranty for a simplified and worry-free installation.Please note: Mishimoto fully inspects and cleans all products prior to packaging. However, it is recommended that customers flush the oil cooler with one quart of clean oil prior to installation to remove any debris accumulated during shipping. Please feel free to contact us at support@mishimoto.com if you have any questions.
Read more
TECH SPECS
More Information
Engine Codes
S55
Chassis Codes
F80 F82 F83 F87
Caution
It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact our customer experience team.
Overall Height (in)
7
Overall Length (in)
29.2
Overall Width (in)
1.6
Applications
2015-2018 BMW M3 Sedan 2015-2020 BMW M4 Coupe 2015-2020 BMW M4 Convertible 2016 BMW M4 GTS Coupe 2019-2020 BMW M4 CS Coupe 2019-2020 BMW M2 Competition
Purchase Includes
Oil Cooler 1ft, 10in Nylon Braided hose with 45 and 70 -10AN Fittings 3ft, 3in Nylon Braided Hose with 45 and 90 -10AN Fittings MMOCF-F80 Application Specific Oil Cooler Adaptors Braided Line Separator Bracket Mounting Hardware Mishimoto Lifetime Warranty
Warranty
Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
{{/image.url}}
{{^image.url}}
{{/image.url}}