Back to top
Mitsubishi Lancer Evolution 7/8/9 Oil Cooler Kit, 2001-2007

Packaging
Packaging
Packaging
Packaging
Mitsubishi Lancer Evolution 7/8/9 Oil Cooler Kit, 2001-2007
Mitsubishi Lancer Evolution 7/8/9 Oil Cooler Kit, 2001-2007
Mitsubishi Lancer Evolution 7/8/9 Oil Cooler Kit, 2001-2007
Mitsubishi Lancer Evolution 7/8/9 Oil Cooler Kit, 2001-2007
Mitsubishi Lancer Evolution 7/8/9 Oil Cooler Kit, 2001-2007
Mitsubishi Lancer Evolution 7/8/9 Oil Cooler Kit, 2001-2007
Mitsubishi Lancer Evolution 7/8/9 Oil Cooler Kit, 2001-2007
Mitsubishi Lancer Evolution 7/8/9 Oil Cooler Kit, 2001-2007
Mitsubishi Lancer Evolution 7/8/9 Oil Cooler Kit, 2001-2007
£372.00 (Incl. VAT)
Installation Difficulty

Add to Build List
  • 10% greater cooling efficiency than stock
  • Minimal pressure loss
  • Direct fit for the Lancer
  • Evolution
  • Stealth Black or Sleek
  • Silver cooler options
  • Includes braided stainless steel lines
  • Mishimoto Lifetime Warranty

The Lancer Evolution is a great vehicle for sliding around back roads, plowing through the straightaway at a road course, or just picking up the kids from school. The turbocharged four-cylinder demands an effective and reliable cooling system to perform at its best. The Mitsubishi Lancer Evolution 7/8/9 Oil Cooler Kit is ideal for reducing temperatures in your street or track Evo. This kit places a large 25-row cooler in the front bumper for optimum airflow and cooling efficiency.

This oil cooler kit includes direct-fit, application-specific brackets and durable preassembled stainless steel oil lines with -10AN fittings for a bolt-on installation that completely replaces your stock oil-cooling unit. The large and efficient Mishimoto 25-row, stacked-plate oil cooler will decrease oil temperatures by up to 30 degrees and reduce oil degradation, resulting in proper lubrication of engine and turbocharger components, even under the stress of competitive driving.

Combine this oil cooler kit with the Mishimoto Lancer Evolution Performance aluminium Radiator and silicone radiator hose kit for complete control over your engine fluid temperatures! As with all our products, this kit includes the Mishimoto Lifetime Warranty.

Mishimoto Automotive (“Mishimoto”) warrants their products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorised dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.

For our complete warranty policy, please click here.

EVEN MORE COOL ITEMS

TECH SPECS

Material 6061 Aluminum

Core Height 185.9 mm

Rows 25

Cooler Construction Stacked-plate

Note Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.

Core Thickness 50.03 mm

Core Length 279.4 mm

Fitting Size -10AN

Engine Codes 4G63

Chassis Codes CT9A

Pressure Drop 2-3 PSI

Install Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.

Caution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact sales@mishimoto.com.

Increase In Oil Capacity No increase

Temp Difference 20-30 degrees

Purchase Includes (4) Application-Specific Mounting Brackets
(1) 25-Row Oil Cooler (Silver or Black)
(1) 1fit, 4.5in Stainless Steel Braided Hose with 90 Degree and Straight-10AN Fittings
(1) 1ft, 3in Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings
(1) M18 x -10AN Straight Fitting
(1) Banjo Fitting w/ Bolt M18 x -10AN, Black
(1) Mounting Hardware Set
Mishimoto Lifetime Warranty

FREQUENTLY ASKED QUESTIONS

Be the first to ask a question!
See how Mishimoto pushes the limits
Push the limits with Mishimoto