- Direct fit for the 2007–2011 Jeep Wrangler JK
- Application-specific mounting brackets
- Premade braided stainless steel oil lines with durable –AN fittings
- Billet aluminium oil sandwich plate in standard or thermostatic form
- 19-row stacked-plate oil cooler for optimal fluid temperature reduction
- Reduces oil temperatures by up to 40°F
- Compatible with all Mishimoto JK Wrangler parts
- Increases oil capacity by .75 qt
- Mishimoto Lifetime Warranty
Your high-performance JK demands Jeep performance parts and a cooling solution that can keep up in the most extreme environments. Whether you are cruising through the dunes or hitting the trails, properly regulated oil temperatures are vital to the life of your engine. Excessive temperatures result in rapid oil degradation and can put a quick end to a fun day in your rig. Mishimoto has the perfect solution for controlling oil temperatures – the Jeep JK direct-fit oil cooler kit. This kit utilizes precision-engineered JK-specific mounting brackets, pre-made stainless steel lines, oil filter sandwich plate, and all hardware necessary for a quick and easy installation. The Mishimoto Jeep Wrangler JK Oil Cooler Kit adds .75 qt to your oil capacity and reduces temperatures by up to 40°F while maintaining minimal pressure drop. This kit is a perfect complement to the Mishimoto Jeep JK Transmission Cooler Kit and the Mishimoto Performance aluminium Jeep Wrangler Radiator for the ultimate cooling solution for your Jeep JK. This oil cooler kit is available with our standard Oil Sandwich Plate or Oil Sandwich Plate with Rear-Mounted Thermosta for additional oil temperature control. As with all our Jeep Wrangler parts, this kit includes the Mishimoto Lifetime Warranty
(3) – Application Specific Mounting Brackets
(1) – 19-Row Oil Cooler
(2) – 2'8" Stainless Steel Braided Hose w/ -10AN Fittings
(1) – M20 Sandwich Plate (thermostatic option available)
(1) – Stainless Steel Sandwich Plate Adapter, 3/4" -16
(2) – Banjo Fitting w/ Bolt M20 x -10AN, Black
(2) – 1/8" NPT Plugs
(1) – Large O-ring
(1) – Mounting Hardware Set
Mishimoto Lifetime Warranty
This kit comes with MMOP-SPTR, our sandwich plate with rear-mounted thermostat. Mishimoto does not recommend using MMOP-SPT due to suspension clearance issues. Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.
- TECH SPECS
Engine Codes EGH (3.8L) Chassis Codes JK
Material 6061 Aluminum Core Height 5.43" Rows 19 Cooler Construction Stacked-plate Core Thickness 1.97" Core Length 11" Fitting Size -10AN Install Torque Specs Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs. Caution It is the installer's responsibility to check all thermostat plugs, NPT plugs, line fittings, and other connections to assure they are fully tightened before operating the vehicle. Mishimoto recommends that you check all connections at regular intervals, especially during the first few miles after installation. For additional technical information, contact firstname.lastname@example.org. Increase In Oil Capacity 0.75 Quarts (0.701L) Temp Difference 40°F Also Fits 2007-2011 Jeep Wrangler
2007-2011 Jeep Wrangler Unlimited
Mishimoto Automotive (“Mishimoto”) warrants their products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorised dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
- Be the first to ask a question!