- Direct fit for 2015+ Ford Mustang EcoBoost w/ stock turbo
- Insulates turbo hot side to reduce engine bay temperatures and maintain turbocharger efficiency
- Protects vital cooling components from excessive heat
- Interior layer is rated to withstand 1,260°C
- Volcanic lava rock and titanium outer layer with high-silica and stainless-steel inner layer for optimal heat protection
- Stainless-steel fastening buttons resist corrosion
- Includes stainless-steel wire and springs for multiple installation options
- Mishimoto Lifetime Warranty
Help reduce the heat in your 2015+ Ford Mustang EcoBoost engine bay with this Mishimoto turbo blanket. One of the main drawbacks to a turbocharger is the massive amount of heat that it produces. That heat can severely affect intake air temperatures and rob your engine of power. Additionally, keeping the exhaust gases that spin your turbo hot makes for a more efficient, better spooling turbo. That's why it's so important to insulate the hot side of the turbocharger and keep the heat in. With Mishimoto's 2015+ Ford Mustang EcoBoost turbo blanket, the heat stays where it's supposed to be and out of your engine bay.
Our turbo blankets are constructed with an outer layer of volcanic lava rock and titanium woven fabric. The inner layer traps heat with a high-silica fabric and stainless-steel mesh for maximum durability. This allows the interior layer to withstand over 2,300°F (1,260°C) while the outer layer protects against temperatures over 1,760°F (960°C). Mishimoto turbo blankets have no trouble keeping the heat from permeating throughout the engine bay. This Mishimoto turbo blanket is a direct fit for the stock turbocharger equipped on your 2015+ Ford Mustang EcoBoost and is backed by our Mishimoto Lifetime Warranty for a lifetime of protection against engine bay heat.
(1) Direct-fit Turbo Blanket
(2) Stainless-Steel Springs
(1) Spool Stainless-Steel Wire
(1) Note Card
Mishimoto Lifetime Warranty
1. Always wear protective gloves when handling the turbo blankets. The product contains loose glass fibers that may irritate the skin.
2. Mishimoto turbo blankets are constructed with fire retardant material. However, if the fabric is contaminated with a flammable liquid such as fuel and oil, a fire can start and propagate on the turbo blanket.
3. Mishimoto turbo blankets are not designed to be removed and reinstalled multiple times. They will become rigid and brittle after several heat cycles due to the material's thermal properties.
4. Ensure that the turbo blanket and fastening parts do not interfere with moving components on and near the turbo during installation.
- TECH SPECS
Diameter To determine the proper turbo blanket size, use the following guide based on the total diameter of your turbo's impeller housing:
- Less than 127mm - T25/T28
- 127mm - 152mm - T3
- 152mm - 191mm - T3/T4
- 191mm - 216mm - T4
- 216mm - 267mm - T6
Product Type Turbo Blanket Material(s) Volcanic Lava Rock
96% Silica Fiber
Mishimoto Automotive (“Mishimoto”) warrants their products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorised dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
- Be the first to ask a question!