Back to top
Not Available
  • Direct fit for the 2003–2007 Ford 6.0 Powerstroke
  • Made from 5052 aluminium tubing for smooth airflow and high strength
  • Fits with stock and Mishimoto intercooler pipes
  • Includes two raised ports for sensors or injection nozzles
  • Additional features below
Features

PRODUCT FEATURES

  • Direct fit for the 2003–2007 Ford 6.0 Powerstroke
  • Made from 5052 aluminium tubing for smooth airflow and high strength
  • Fits with stock and Mishimoto intercooler pipes
  • Includes two raised ports for sensors or injection nozzles
  • Includes rubber O-ring, specified for high boost pressures
  • Includes new Duracore™ boot and constant tension T-bolt clamps
  • Easy installation, installs in less than 30 minutes
  • Mishimoto lifetime warranty
  • Expected Ship Date: 10/7/2015

DESCRIPTION

Mishimoto has developed an aluminium intake elbow specifically for the 2003–2007 Ford 6.0L Powerstroke! This intake elbow removes the tight bend that is evident on the stock inake elbow and allows for greater airflow! The Mishimoto intake elbow works with either the stock plastic or aluminium cold side pipe or the Mishimoto cold side pipe! The Mishimoto intake elbow also comes with a new silicone cold side boot with Duracore™ Technology to replace your worn out stock boot. In addition, we also include a new O-ring gasket and constant-tension T-bolt clamps for hassle-free installation.The Mishimoto intake elbow also features two pre-tapped 1/8" NPT sensor bungs for any added sensors or injection systems to make this product extremely versatile. The indented beadroll allows the stock or Mishimoto boot to grip onto the edge of the pipe, eliminating the chance of boost leaks. The Mishimoto intake elbow comes in a polished, wrinkle black, or all-new wrinkle blue finish to really set your truck apart! Like all products, this also comes with the Mishimoto lifetime warranty you can trust!

PURCHASE INCLUDES

(1) Aluminum intake pipe
(1) Silicone boot with Duracore™ Technology
(2) 3.25" Constant Tension T-bolt Clamps
(1) O-ring gasket
Mounting Hardware
Mishimoto Lifetime Warranty

NOTES

2003.5–2004 models will require aftermarket engine tuning to use this productFor 2003–2004 models, the engine's throttle body assembly must be removed from the intake manifold prior to installing this product, specific engine tuning will be needed once this throttle body assembly is removed.

TECH SPECS

VEHICLE SPECS

MakeFord
Fits 2003–2007 Ford F-250 w/ 6.0L Powerstroke
2003–2007 Ford F-350 w/ 6.0L Powerstroke
2003–2007 Ford F-450 w/ 6.0L Powerstroke
2003–2007 Ford F-550 w/ 6.0L Powerstroke

PRODUCT SPECS

Installation Torque Specs 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps.
These clamps have an operating range of 18-35 in-lbs (2-4N*M).
Do not exceed the maximum torque rating of 35 in-lbs (4N*M).
Pipe Diameter OD: 3"
ID: 2.85"
Constant Tension T-Bolt Clamps Specs (2) 3.25" Constant-Tension T-bolt Clamps
ENGINEERING

Rubbing Elbows with the 6.0L! Mishmoto Powerstroke Intake Elbow R&D, Part 3: Final Product

September 24, 2015

Interested in purchasing our 6.0L intake elbow? Check out more details on our product page linked below! Mishimoto Ford 6.0L Powerstroke Intake Elbow! We have quite a bit going on with this project! Our discounted pre-sale has launched, and we are currently accepting orders. In addition, our final prototype elbows arrived and have been test … Continue reading Rubbing Elbows with the 6.0L! Mishmoto Powerstroke Intake Elbow R&D, Part 3: Final Product →

Read More 

Rubbing Elbows with the 6.0L! Mishmoto Powerstroke Intake Elbow R&D, Part 3: Final Product

Rubbing Elbows with the 6.0L! Mishmoto Powerstroke Intake Elbow R&D, Part 2: 3D Modeling

August 12, 2015

Interested in purchasing our 6.0L intake elbow? Check out more details on our product page linked below! Mishimoto Ford 6.0L Powerstroke Intake Elbow!   We’re back with another update on our 6.0L Powerstroke intake elbow project! Last time we covered the stock unit and noted the plans we had for our rendition of the intake … Continue reading Rubbing Elbows with the 6.0L! Mishmoto Powerstroke Intake Elbow R&D, Part 2: 3D Modeling →

Read More 

Rubbing Elbows with the 6.0L! Mishmoto Powerstroke Intake Elbow R&D, Part 2: 3D Modeling

Rubbing Elbows with the 6.0L! Mishimoto Powerstroke Intake Elbow R&D, Part 1: Factory Component Evaluation and Initial Prototyping

July 15, 2015

Interested in purchasing our 6.0L intake elbow? Check out more details on our product page linked below! Mishimoto Ford 6.0L Powerstroke Intake Elbow!   If you are familiar with our brand, you know we have a vast product line of heat exchangers and associated products available for the Ford 6.0L Powerstroke. We’ve had great feedback … Continue reading Rubbing Elbows with the 6.0L! Mishimoto Powerstroke Intake Elbow R&D, Part 1: Factory Component Evaluation and Initial Prototyping →

Read More 

Rubbing Elbows with the 6.0L! Mishimoto Powerstroke Intake Elbow R&D, Part 1: Factory Component Evaluation and Initial Prototyping
blogload
WARRANTY

Mishimoto Automotive (“Mishimoto”) warrants their products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorised dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.

For our complete warranty policy, please click here.

Mishimoto Lifetime Warranty on ALL Products
FAQ
Be the first to ask a question!

SHOW US YOUR #Mishimoto Build

PUSH THE LIMITS WITH MISHIMOTO
Push the limits with Mishimoto
Sponsorship Mishimoto
Mishimoto Intercooler Core Fabrication
Heat Protection Shield Wrap Tape