- Replaces weak factory plastic cold-side pipe
- Replaces small diameter hot-side pipe
- Improves airflow, power, and EGTs
- Installs in under two hours
- No additional tuning required
- Includes Mishimoto Silicone Boots with DuraCore™ technology and Mishimoto Constant Tension T-bolt Clamps
- Mishimoto Lifetime Warranty
- Mishimoto Lifetime Warranty
Mishimoto has developed an intercooler pipe and boot kit specifically engineered for use on the 2010–2012 Dodge 6.7L Cummins. After investigating the pipe routing and size, our engineers identified numerous areas where improvement was necessary. The Mishimoto Cummins performance intercooler pipes are constructed of mandrel-bent aluminium routed in a way that eliminates restrictive bends present in the factory pipes. Mishimoto engineers also increased the pipe diameter from 3” to 3.5” to provide substantial improvements in power, airflow, and EGTs.
Mishimoto DuraCore™ boots and Constant-Tension T-bolt clamps are also included in this Cummins performance kit.Mishimoto DuraCore™ technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone diesel boots. Compared to normal silicone, DuraCore™ provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. The Mishimoto Dodge 6.7L Cummins Intercooler Pipe and Boot Kit is designed to work with the Mishimoto Dodge 6.7L Cummins Performance Intercooler. This Cummins performance kit is made in the USA and like all of our Cummins performance parts, includes the Mishimoto Lifetime Warranty.
(2) Aluminum Pipes
(4) Silicone Boots with Duracore™ Technology
(8) Constant-Tension T-Bolt Clamps
(2) Aluminum Mishimoto "M" Logo Badges
Mishimoto Lifetime Warranty
Only fits with Mishimoto http://www.mishimoto.com/dodge-6-7l-cummins-intercooler-10-12.html Dodge 6.7L Cummins Performance Intercooler
- TECH SPECS
Make Dodge Fits 2010–2012 Dodge Ram 2500 w/ 6.7L Cummins Engine
2010–2012 Dodge Ram 3500 w/ 6.7L Cummins Engine
2010–2012 Dodge Chassis Cab w/ 6.7L Cummins Engine
Installation Torque Specs 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M). Pipe Diameter Hot Side: 3.0"
Cold Side: 3.5"
Constant Tension T-Bolt Clamps Specs (3) 3.25” Constant-Tension T-Bolt Clamp
(5) 4.0” Constant-Tension T-Bolt Clamp
Silicone Boots With DuraCore Specs Boot 1: 3.0”
Boot 2: 3.0”–3.5”
Boot 3: 3.5”
Boot 4: 3.5”
Mishimoto Automotive (“Mishimoto”) warrants their products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorised dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.
For our complete warranty policy, please click here.
- Be the first to ask a question!